Applicable standard
Operating
range
temperature
Storage
temperature range
Storage
-55 c to +105c (Note1)
20% to 80% (Note2)
-10 c to +60c (Note3)
Operating
Rating
40% to 70% (Note3)
Humidity range
Humidity range
Voltage
Applicable connector
Applicable cable
DF63SF-*S-3.96C
AC/DC 630V
UL1007 AWG#16
UL1007 AWG#18
Current
15A(2PIN,P=7.92mm)
AWG#16
12A(3PIN,P=3.96mm)
13A(2PIN,P=7.92mm)
10A(3PIN,P=3.96mm)
AWG#18
Specifications
Test method
Item
Requirements
QT AT
Construction
General examination
Visually and by measuring instrument.
Confirmed visually.
According to drawing.
X
X
X
X
Marking
Electric characteristics
Contact resistance
10 m MAX.
20mV MAX, 1mA (DC or 1000Hz).
-
X
Mechanical characteristics
Contact insertion
And extraction
Forces
Insertion force
Extraction force
4.5 N MAX.
0.3 N MIN.
□0.8±0.002 mm by steel gauge.
X
X
-
-
50 times insertion and extraction.
Mechanical operation
①Contact resistance: 20 mΩ MAX.
②No damage, crack or looseness of parts.
Frequency 10 to 55 Hz, single amplitude
0.75 mm, at 10 cycles for 3 direction.
490 m/s2 duration of pulse 11 ms at 3 times each for 3 both
axial directions.
Vibration
Shock
-
-
X
X
Environmental characteristics
Damp heat
Exposed at 40 ± 2℃ , 90 to 95 %, 96 h.
①Contact resistance: 20 mΩ MAX.
-
-
X
X
(steady state)
(After leaving the room temperature for
1 to 2h.)
②No damage, crack or looseness of parts.
Rapid change of temperature Temperature -55℃→ +105℃
Time 30min→ 30min
Under 5 cycles.
(the transferring time of the tank is 2 to 3 min)
(after leaving the room temperature for 1 to 2h.)
Note1: Include the temperature rising by current.
Note2:No condensing
Note3: Apply to the condition of long term storage for unused products before mounted on PCB.
After mounted on PCB board , operating temperature and humidity range is applied for interim storage during transportation.
Count
Description of revisions
Designed
Checked
Date
0
△
Remarks
Approved
Checked
Designed
Drawn
HS.OKAWA
18.08.23
18.08.23
18.08.23
18.08.23
Unless otherwise specified, refer to IEC 60512.
SZ.ONO
TS.KUMAZAWA
TS.KUMAZAWA
Note QT:Qualification test AT:Assurance test X:applicable test
Drawing No.
ELC-375078-05-00
DF63SF-1618SCA(05)
Part No.
Specification sheet
Hirose electric co., Ltd.
0
△
1/1
Code No.
CL680-0706-0-05
FORM HD0011-2-1