Meets ANSI/ESD S20.20, Packaging standard ANSI/ESD S541,
Static Control Bag ANSI/ESD S11.4 Level 1, and IPC/JEDEC J-STD-033.
Moisture Barrier Bag Dri-Shield® 3700
This foil moisture barrier bag provides superior protection for ESD
sensitive and moisture sensitive electronics, typically SMT (Surface
Mount Technology) items. Best practice is to use with Desiccant and
a Humidity Indicator Card. The bags are heat sealable and suitable
for vacuum packaging. Bags are printed with ESD protective and
moisture sensitive warning symbols and a lot code for traceability.
Physical
Typical Value
Testing Method
Moisture Vapor
Transmission Rate
(MVTR)
< 0.0003 grams/100 sq. in./24 hrs
< 0.002 grams/100 sq. in./24 hrs
ASTM F1249
ASTM F392 condition E and
ASTM F2149
Tensile Strength
9900 PSI, 68 MPa
25 lbs, 111 N
ASTM D882
Puncture Resistance
MIL-STD-3010C Method
2065
SCS Moisture Barrier Bags Dri-Shield® 3700 are manufactured
from a laminate of polyester, foil, and polyethylene. The metal layer
provides discharge shielding and minimizes the penetration of
electric fields and electrostatic discharges.
Seal Strength
Thickness
15 lbs, 66 N
ASTM D882
4.2 mils, 0.1067 mm +/-10%
Pass
MIL-STD-3010 Method 1003
IPC-TM-650 2.4.1
Testing Method
Marking Adhesion
Electrical
Typical Value
ESD Shielding
<10 nJ
ANSI/ESD STM11.31
ANSI/ESD STM11.11
1 x 104 to < 1 x 1011 ohms
Surface Resistance -
Interior
1 x 104 to < 1 x 1011 ohms
Surface Resistance -
Exterior
ANSI/ESD STM11.11
Tolerance: Width -0, +1/4"
Length +/- 1/8" Offset 0 to 1/4"
Seal width 3/8" with a tolerance of +/- 1/8"
EMI Attenuation
Cleanliness
Silicone
45 dB
1 to 10 GHz
Testing Method
FTIR
Typical Value
Not Detected
Note: Standard bag markings shown
above are not to scale.
Heat Sealing Conditions Typical Value
Temperature
Time
400°F, 204°C
0.6 – 4.5 seconds
Pressure
30 – 70 PSI, 206 – 482 KPa
Bag is free of amines, silicones and heavy metals.
This product is intended for commercial use only. This product is not on the Qualified Product
Listing under the Defense Standardization Program.
NOTE: The complete dry package concept of packaging for electronics requires three elements:
Moisture Barrier Bags - To Protect
Desiccants - To Absorb Moisture
Humidity Indicator Cards - To Monitor Performance
SCS Moisture Barrier Bags are packaged in a polyethylene bag.
RoHS, REACH, and Conflict Minerals Statement
See the Desco Industries RoHS, REACH, and Conflict Minerals Statement:
DescoIndustries.com/ROHS3.aspx
Made in the United States of America with Globally Sourced Materials.
Specifications and procedures subject to change without notice.
See the SCS Limited Warranty:
StaticControl.DescoIndustries.com/Limited-Warranty.aspx
DRI-SHIELD® 3700 MOISTURE BARRIER BAG
DRAWING
NUMBER
Dri-Schield 3700
DATE
September
2019
926 JR Industrial Drive, Sanford, NC 27332
WEB SITE: StaticControl.com
PHONE (919) 718-0000
© 2019 DESCO INDUSTRIES INC
Employee Owned