CYUSB301X
EZ-USB® FX3: SuperSpeed USB Controller
■ Ultra low-power in core power-down mode
❐ Less than 60 µA with VBATT on and 20 µA with VBATT off
Features
■ Universal serial bus (USB) integration
❐ USB 3.0 and USB 2.0 peripherals compliant with USB 3.0
specification 1.0
❐ 5-Gbps USB 3.0 PHY compliant with PIPE 3.0
❐ High-speed On-The-Go (HS-OTG) host and peripheral
compliant with OTG Supplement Version 2.0
❐ Thirty-two physical endpoints
❐ Support for battery charging Spec 1.1 and accessory charger
adaptor (ACA) detection
■ Independent power domains for core and I/O
❐ Core operation at 1.2 V
❐ I2S, UART, and SPI operation at 1.8 to 3.3 V
❐ I2C operation at 1.2 V
■ Package option
❐ 121-ball, 10- × 10-mm, 0.8-mm pitch Pb-free ball grid array
(BGA)
❐ 131-ball, 4.7- × 5.1-mm, 0.4-mm pitch wafer-level chip scale
package (WLCSP)
■ EZ-USB® software and development kit (DVK) for easy code
development
■ General Programmable Interface (GPIF™ II)
❐ Programmable 100-MHz GPIF II enables connectivity to a
wide range of external devices
❐ 8-, 16-, and 32-bit data bus
❐ As many as16 configurable control signals
Applications
■ Fully accessible 32-bit CPU
❐ ARM926EJ core with 200-MHz operation
❐ 512-KB or 256-KB embedded SRAM
■ Digital video camcorders
■ Digital still cameras
■ Printers
■ Additional connectivity to the following peripherals
❐ I2C master controller at 1 MHz
■ Scanners
❐ I2S master (transmitter only) at sampling frequencies of
■ Video capture cards
■ Test and measurement equipment
■ Surveillance cameras
■ Personal navigation devices
■ Medical imaging devices
■ Video IP phones
32 kHz, 44.1 kHz, and 48 kHz
❐ UART support of up to 4 Mbps
❐ SPI master at 33 MHz
■ Selectable clock input frequencies
❐ 19.2, 26, 38.4, and 52 MHz
❐ 19.2-MHz crystal input support
■ Portable media players
■ Industrial cameras
Cypress Semiconductor Corporation
Document Number: 001-52136 Rev. *N
•
198 Champion Court
•
San Jose, CA 95134-1709
•408-943-2600
Revised May 31, 2013