CY8C41xx
PSoC™ 4 MCU: PSoC™ 4100S Plus
Based on Arm® Cortex®-M0+ CPU
General description
PSoC™ 4 is a scalable and reconfigurable platform architecture for a family of programmable embedded system
controllers with an Arm® Cortex®-M0+ CPU. It combines programmable and reconfigurable analog and digital
blocks with flexible automatic routing. PSoC™ 4100S Plus is a member of the PSoC™ 4 platform architecture. It is
a combination of a microcontroller with standard communication and timing peripherals, a capacitive
touch-sensing system (CAPSENSE™) with best-in-class performance, programmable general-purpose
continuous-time and switched-capacitor analog blocks, and programmable connectivity. PSoC™ 4100S Plus
products are upward compatible with members of the PSoC™ 4 platform for new applications and design needs.
Features
• 32-bit MCU subsystem
- 48-MHz Arm® Cortex®-M0+ CPU with single-cycle multiply
- Up to 128 KB of flash with read accelerator
- Up to 16 KB of SRAM
- 8-channel DMA engine
• Programmable analog
- Two opamps with reconfigurable high-drive external and high-bandwidth internal drive and comparator
modes and ADC input buffering capability. Opamps can operate in Deep Sleep low-power mode.
- 12-bit 1-Msps SAR ADC with differential and single-ended modes, and Channel Sequencer with signal averag-
ing
- Single-slope 10-bit ADC function provided by a capacitance sensing block
- Two current DACs (IDACs) for general-purpose or capacitive sensing applications on any pin
- Two low-power comparators that operate in Deep Sleep low-power mode
• Programmable digital
- Programmable logic blocks allowing Boolean operations to be performed on port inputs and outputs
• Low-power 1.71-V to 5.5-V operation
- Deep Sleep mode with operational analog and 2.5-µA digital system current
• Capacitive sensing
- Capacitive sigma-delta (CSD) provides best-in-class signal-to-noise ratio (SNR) (>5:1) and water tolerance
- Infineon-supplied software component makes capacitive sensing design easy
- Automatic hardware tuning (SmartSense)
• LCD drive capability
- LCD segment drive capability on GPIOs
• Serial communication
- Five independent run-time reconfigurable Serial Communication Blocks (SCBs) with re-configurable I2C, SPI,
or UART functionality
• Timing and pulse-width modulation
- Eight 16-bit Timer, Counter, Pulse-Width Modulator (TCPWM) blocks
- Center-aligned, edge, and pseudo-random modes
- Comparator-based triggering of kill signals for motor drive and other high-reliability digital logic applications
- Quadrature decoder
Datasheet
www.infineon.com
Please read the Important Notice and Warnings at the end of this document
page 1
002-19966 Rev. *K
2023-01-24