Ver.1.01
CONPROSYS Series
Signal Tower Monitoring
CPS-PAV-AExx Series
This product is a signal tower light sensor which can be attached to the signal tower
of the PATLITE Corporation. *1 and remotely monitors the operation in the facilities.
It is designed to meet the IP65 standard and ensures waterproofing and dust-
proofing. Adopting the sub-giga band and low power consumption wireless
EnOcean standard enables the product to be powered by solar cell and an auxiliary
battery, and realizes a wireless structure and simple installation.
Graphical display and logging functions for the lighting status of the signal tower
can be added with the specified CONPROSYS controller.
*1 Refer to the specification table for applicable signal towers.
* The contents in this document are subject to change without notice.
* Visit the CONTEC website to check the latest details in the document.
* The information in the data sheets is as of June, 2020.
Features
System Components
CPS-PAV-AES1-xx <Receiver Set >
1. The CONPROSYS controller (Individual purchase), which connects the EnOcean
Alliance USB receiver, is available from a wide selection.
2. Simply select a transmitter ID and register it on the setting page to set up.
3. Any of the settings or operation can be done through a web browser.
No special software is required to start monitoring.
4. The monitoring screen (Andon style display, Timeline bars, and Facility map) is
ready to be used. Timeline bars graphically show the obtained data in
chronological order. With CONPROSYS HMI controllers, the monitoring screen
can be freely customized. Furthermore, using CONPROSYS VTC enables the
user to process various tasks.
5. Up to 16 transmittersare configurable per Receiver.
6. An alert mail is sent to inform the user when an error occurs in real time.
Mail notification can be sent up to 10 places.
Packing List
*The CONPROSYS controller (Individual purchase) is required for setup.
Product...1
Cable Tie...1
Supporting Parts...1
Holding Ring lower part (4 types) ...1 per product
Holding Ring upper part (4 types) ...1 per product
Lithium Primary Battery...1 (Equipped)
SD Card *1...1
CPS-PAV-AE01-xx <Transmitter >
1. Quick setting! The transmitter can be added to the signal tower within 10
seconds. Up to five tiers of the light are manageable.
2. The matching holding rings (Φ40, 50, 60, 70) are available to set the receiver with
the signal tower (LR series: 40mm pitch (Φ40, 50, 60, 70mm) , LME series: 41.5mm
pitch (Φ60mm)) of the PATLITE Corporation.
USB Receiver *1...1
Product Guide...1
Warranty Certificate...1
Serial Number Label...1
3. Adopting low power consumption wireless EnOcean standard enables the
product to be powered by solar cell, and it realizes a wireless structure and
provides simple installation.
*1 Included in the CPS-PAV-AES1-US model only.
4. The transmitter operates by a solar cell during the day-time (under lighting) and
by an industrial lithium battery during the night-time (in darkness).
The battery maximum life is six years*1
5. Owning its high environmental resistance (IP65 protection, operation capability in
the temperature between -20 and + 60°C), it is suited for even the harsh
environments such as in the factories with moisture and dust.
*1 It is a lifetime when the product runs for 12 hours by a solar cell in the day time (under
lighting), and 12 hours by an industrial lithium battery in the night time (in darkness).
CPS-PAV-AExx Series
1