Ver.1.03
CONPROSYS Series
Relay Output Module
CPS-RRY-4PCC
This product is a configurable module to provide a function of relay
output interface and operates along with the configurable type controller
of our CONPROSYS series. It contains four channels of relay outputs
(Form C) with independent common.
* The contents in this document are subject to change without notice.
* Visit the CONTEC website to check the latest details in the document.
* The information in the data sheets is as of August, 2019.
* Specifications, color and design of the products are subject to change
without notice.
Features
Specifications
Relay outputs (Form C) with independent common
This product has four channels of relay outputs (Form C) with
independent common.
Function specifications
Item
CPS-RRY-4PCC
Output
Number of output signal channels 4 (Independent common)
Independent common terminal provided per channel, capable of
supporting a different external power supply.
The rated load is designed to be a high-capacity of 240VAC 6A, 24VDC
5A per channel.
Output format
Relay contacts (Form C) output
0 -3 (Green)
LED
Operate time (ON)
Release time (OFF)
Contact resistance (Initial state)
Within 20ms
Within 20ms
125mΩ max.
*
The following ratings need to be satisfied in order to meet CE, ULs requirements. Use the product within these
Relay contact
spec. *1*2
Rated load
240VAC 6A (resistive load),24VDC 5A (resistive load)
400VAC, 300VDC
ratings.
CE: 240VAC/3A (Resistive), 24VDC/5A (Resistive)
UL: 240VAC/6A (Resistive), 24VDC/5A (Resistive)
Maximum
voltage
Maximum
current
6A (AC),5A (DC)
Relay isolation
As bus is isolated from the output interfaces by relays, this product has
excellent noise performance.
Mechanical life 10,000,000operations min or more (Switching times : 300
expectancy
operations/min)
Electrical
lifetime
50,000operations min. (Switching times : 10operations/min,
with rated load)
Compact design
Compact design, 25.2 (W)×94.7(D)×124.8 (H), features flexibility in
installation.
Connector
2 pieces 5.08mm pitch 3-pin terminal
AWG28 -12
Applicable wire
LED
Status (Green, Red)
Adaptable to a temperature range between -20 and +60°C
The product is capable of operating in the temperature between -20 and
+ 60°C. It can be installed in the various environments.
Supply voltage
Current consumption
Physical dimensions (mm)
Weight
24VDC(±10%)
0.1A(Max.)
25.2(W)×94.7(D)×124.8(H) (No projection included)
250g
Installation easy with two pieces of terminal support and DIN rail
You can install and remove a terminal connector without a screwdriver so
that it can shorten the time of the replacement. As the product can be
not only mounted on DIN rail, but also is removable along the side rails,
replacing is simple and easy as well.
Installation method
Quick mounting on the 35mm DIN rail
*1 To meet CEs requirements, the rating should be up to 240VAC/3A (Load resistor), 24VDC/5A (Load resistor). As
for ULs requirements, the rating should be up to 240VAC/6A (Load resistor), 24VDC/5A (Load resistor). Use the
product within the specified ratings to satisfy these requirements.
*2 Refer to the maximum switching capacity listed in the Reference Manual (Hardware) and use the product
within the specified voltage and current range.
Equipped with LED for an operation check
The product has LED for an operation check, which helps you visually
confirm the communication status of each interface.
Caution
You can set the modules as you desire to the configurable controller up to 16 modules.
The total current consumption of the modules should be less than 3.3A.
No electrolytic capacitor battery
No electrolytic capacitor is used. The Contec is creating the product with
a longer life.
CPS-RRY-4PCC
1