OBSOLETE
January 2000
COP888EK
8-Bit CMOS ROM Based Microcontrollers with 8k
Memory, Comparator, and Single-slope A/D Capability
Family features include an 8-bit memory mapped architec-
ture, 10 MHz CKI with 1µs instruction cycle, three multi-
function 16-bit timer/counters with PWM, MICROWIRE/
General Description
The COP888EK ROM based microcontrollers are highly in-
™
tegrated COP8 Feature core devices with 8k memory and
™
PLUS serial I/O, one analog comparator with seven input
advanced features including a Multi-Input Comparator and
Single-slope A/D capability. These single-chip CMOS de-
vices are suited for applications requiring a full featured, low
EMI controller with an analog comparator, current source,
and voltage reference. The COP87L88EK/RK Family de-
vices are pin and software compatible (different VCC range)
16k or 32k OTP (One Time Programmable) versions for pre-
production, and for use with a range of COP8 software and
hardware development tools.
multiplexor, an analog current source and VCC reference,
two power saving HALT/IDLE modes, idle timer, MIWU, high
current outputs, software selectable I/O options, WATCH-
™
DOG timer and Clock Monitor, Low EMI 2.5V to 6.0V op-
eration and 28/40/44 pin packages.
Devices included in this datasheet are:
Device
Memory (bytes) RAM (bytes) I/O Pins
Packages
28 DIP/SOIC
28 DIP/SOIC
28 DIP/SOIC
Temperature
Comments
COP684EK
COP884EK
COP984EK
COP688EK
COP888EK
COP988EK
8k ROM
8k ROM
8k ROM
8k ROM
8k ROM
8k ROM
256
256
256
256
256
256
24
24
24
-55 to +125˚C 4.5V - 5.5V
-40 to +85˚C
0 to +70˚C
2.5V - 4.0V, EKH=4.0V - 6.0V
36/40 40 DIP, 44 PLCC -55 to +125˚C 4.5V - 5.5V
36/40 40 DIP, 44 PLCC -40 to +85˚C
36/40 40 DIP, 44 PLCC 0 to +70˚C
2.5V - 4.0V, EKH=4.0V - 6.0V
Key Features
n Analog function block with
CPU/Instruction Set Feature
n 1 µs instruction cycle time
— Analog comparator with seven input multiplexor
— Constant current source and VCC/2 reference
n Three 16-bit timers, each with two 16-bit registers
supporting:
— Processor Independent PWM mode
— External Event counter mode
— Input Capture mode
n Twelve multi-source vectored interrupts servicing
— External Interrupt with selectable edge
— Idle Timer T0
— Three Timers (Each with 2 interrupts)
— MICROWIRE/PLUS
— Multi-Input Wake Up
— Software Trap
— Default VIS (default interrupt)
n Versatile and easy to use instruction set
n 8-bit Stack Pointer (SP) — stack in RAM
n Two 8-bit Register Indirect Data Memory Pointers
(B, X)
n 8 kbytes of on-chip ROM
n 256 bytes of on-chip RAM
Additional Peripheral Features
n Idle Timer
n Multi-Input Wake Up (MIWU) with optional interrupts (8)
n WATCHDOG and Clock Monitor logic
n MICROWIRE/PLUS serial I/O
Fully Static CMOS
n Single supply operation: 2.5V to 6.0V
n Temperature ranges: 0˚C to +70˚C, −40˚C to +85˚C, and
−55˚C to +125˚C
I/O Features
™
n Software selectable I/O options (TRI-STATE Output,
Push-Pull Output, Weak Pull-Up Input, High Impedance
Input)
n High current outputs
n Schmitt trigger inputs on Port G and L
n Packages: 44 PLCC with 40 I/O pins, 40 DIP with 36 I/O
pins, and 28 DIP/SO with 24 I/O pins
™
™
™
COP8 , MICROWIRE/PLUS , and WATCHDOG are trademarks of National Semiconductor Corporation.
TRI-STATE® is a registered trademark of National Semiconductor Corporation.
iceMASTER® is a registered trademark of MetaLink Corporation.
© 2000 National Semiconductor Corporation
DS012094
www.national.com