September 1999
COP888CF
8-Bit CMOS ROM Based Microcontrollers with 4k
Memory and A/D Converter
Family features include an 8-bit memory mapped architec-
ture, 10 MHz CKI with 1 µs instruction cycle, two multi-
General Description
The COP888CF ROM based microcontrollers are highly in-
™
function 16-bit timer/counters, MICROWIRE/PLUS serial
™
tegrated COP8 Feature core devices with 4k memory and
I/O, one 8-bit/8-channel A/D converter with prescaler and
both differential and single ended modes, crystal or R/C os-
cillator, two power saving HALT/IDLE modes, idle timer,
MIWU, high current outputs, software selectable I/O options,
advanced features including an A/D Converter. These single-
chip CMOS devices are suited for applications requiring a
full featured controller with an 8-bit A/D converter. Pin and
software compatible (different VCC range) 16k/32k OTP
(One Time Programmable) versions are available
(COP87L88CF Family) for pre-production, and for use with a
range of COP8 software and hardware development tools.
™
WATCHDOG timer and Clock Monitor, 2.5V to 6.0V opera-
tion and 28/40/44 pin packages.
Devices included in this datasheet are:
Device
Memory
RAM
I/O Pins
22
Packages
28 DIP/SOIC
Temperature
-40 to +85˚C
-0 to +70˚C
-40 to +85˚C
-0 to +70˚C
COP884CF
COP984CF
COP888CF
COP988CF
4k bytes ROM
4k bytes ROM
4k bytes ROM
4k bytes ROM
128 bytes
128 bytes
128 bytes
128 bytes
22
28 DIP/SOIC
34/38
34/38
40 DIP, 44 PLCC
40 DIP, 44 PLCC
n Schmitt trigger inputs on Port G
Key Features
n A/D converter (8-bit, 8-channel, with prescaler and both
differential and single ended modes)
n Two 16-bit timers, each with two 16-bit registers
supporting:
CPU/Instruction Set Feature
n 1 µs instruction cycle time
n Ten multi-source vectored interrupts servicing
— External interrupt with selectable edge
— Idle Timer T0
— Two Timers (Each with 2 interrupts)
— MICROWIRE/PLUS
— Processor Independent PWM mode
— External Event counter mode
— Input Capture mode
n 4 kbytes of on-chip ROM
n 128 bytes of on-chip RAM
— Multi-Input Wake Up
— Software Trap
— Default VIS (default interrupt)
n Versatile and easy to use instruction set
n 8-bit Stack Pointer (SP) — stack in RAM
n Two 8-bit Register Indirect Data Memory Pointers (B, X)
Additional Peripheral Features
n Idle Timer
n Multi-Input Wake Up (MIWU) with optional interrupts (8)
n WATCHDOG and Clock Monitor logic
n MICROWIRE/PLUS serial I/O
Fully Static CMOS
<
n Low current drain (typically 1 µA)
I/O Features
n Memory mapped I/O
n Software selectable I/O options (TRI-STATE®Output,
Push-Pull Output, Weak Pull-Up Input, High Impedance
Input)
n High current outputs
n Packages:
— 44 PLCC with 38 I/O pins
— 40 DIP with 34 I/O pins
— 28 DIP/SO with 22 I/O pins
n Single supply operation: 2.5V to 6.0V
n Temperature ranges: 0˚C to +70˚C, and
−40˚C to +85˚C
Development Support
n Emulation and OTP devices
n Real time emulation and full program debug offered by
MetaLink Development System
™
COP8 is a trademark of National Semiconductor Corporation.
™
MICROWIRE is a trademark of National Semiconductor Corporation.
™
MICROWIRE/PLUS is a trademark of National Semiconductor Corporation.
TRI-STATE® is a registered trademark of National Semiconductor Corporation.
™
WATCHDOG is a trademark of National Semiconductor Corporation.
™
iceMASTER is a trademark of MetaLink Corporation.
© 1999 National Semiconductor Corporation
DS009425
www.national.com