THROUGH HOLE CLOCK OSCILLATORS - TTL COMPATIBLE
FEATURES
SERIES CO1 AND CO13
STANDARD 8 AND 14 PIN DIPPACKAGE
TOLERANCEAND STABILITY TO ± 25 PPM
LOW COST
AVAILABLE IN 3.3 VOLT
SPECIFICATIONS
SERIES
CO1
14 PIN DIP
CO13
8 PIN DIP
PACKAGE
FREQUENCY RANGE
500.00 KHz TO 125.00 MHz
CO1100 : ±100 ppm
CO1050 : ±50 ppm
CO1025 : ±25 ppm
500.00 KHz TO 125.00 MHz
CO13100 : ±100 ppm
CO13050 : ±50 ppm
CO13025 : ±25 ppm
FREQUENCY STABILITY†
0° C TO +70° C STANDARD
-40° C TO +85° C EXTENDED
0° C TO +70° C STANDARD
-40° C TO +85° C EXTENDED
OPERATING TEMPERATURE RANGE
STORAGE TEMPERATURE RANGE
VOLTAGE††
-55° C TO +125° C
-55° C TO +125° C
+5 VDC ±0.5 VDC
+5 VDC ±0.5 VDC
500.00 KHz TO 2.999 MHz: 30 mA
3.00 MHz TO 31.999 MHz: 50 mA
32.00 MHz TO 79.999 MHz: 70 mA
80.00 MHz TO 125.00 MHz: 80 mA
500.00 KHz TO 2.999 MHz: 30 mA
3.00 MHz TO 31.999 MHz: 50 mA
32.00 MHz TO 79.999 MHz: 70 mA
80.00 MHz TO 125.00 MHz: 80 mA
INPUT
CURRENT (MAX)
SYMMETRY
(AT 1.4 VDC LEVEL)
40 TO 60% NORMAL
45 TO 55% TIGHT
40 TO 60% NORMAL
45 TO 55% TIGHT
UNDER 9 MHz : ±15 ns MAX
9 MHz TO 32 MHz : ±10 ns MAX
32 MHz TO 80 MHz : ±6 ns MAX
80 MHz TO 125 MHz : ±4 ns MAX
+0.5 V MAX, SINK TO 16 mA
+2.4 V MIN, SOURCE 0.4 mA
1 TO 10 TTL STANDARD
UNDER 9 MHz : ±15 ns MAX
9 MHz TO 32 MHz : ±10 ns MAX
32 MHz TO 80 MHz : ±6 ns MAX
80 MHz TO 125 MHz : ±4 ns MAX
+0.5 V MAX, SINK TO 16 mA
+2.4 V MIN, SOURCE 0.4 mA
1 TO 10 TTL STANDARD
RISE AND FALL TIME
(0.4 - 2.4 VDC)
OUTPUT
LOGIC "0" LEVEL
LOGIC "1" LEVEL
LOAD†††
35
† FREQUENCYSTABILITYINCLUSIVE OF ROOMTOLERANCE ,
FREQUENCY STABILITY OVER TEMPERATURE, 10% POWER SUPPLY VARIATION, AGING, SHOCK,AND VIBRATION
†† +3.3 VOLTVERSION IS AVAILABLE. CONSULT RALTRON FOR SPECIFICATIONS
††† OUTPUTLOADS ALSOAVAILABLEAT 15 pF, 30 pF AND 50 pF. CONSULT RALTRON FOR SPECIFICATIONS
ENVIRONMENTALAND TECHNICAL CONDITIONS
OUTPUT WAVEFORM
ENVIRONMENTAL
TEMPERATURE CYCLE
SHOCK
MIL-STD 883, METHOD 1010, 10 CYCLES -20° C TO 85° C
MIL-STD-202, METHOD 213, TEST CONDITION C
MIL-STD-202, METHOD 204, TEST CONDITION A
tf
tr
VCC
VIBRATION
RESISTANCE TO
SOLDERING HEAT
MIL-STD-202, METHOD 210, TEST CONDITION B
"1" LEVEL
+2.5 VDC
+1.5 VDC
HUMIDITY
85% RELATIVE HUMIDITY AT 85° C 250 HOURS
MECHANICAL
+0.5 VDC
"0" LEVEL
0 VDC
GROSS LEAK TEST
FINE LEAK TEST
MIL-STD-883, METHOD 1014, TEST CONDITION C
MIL-STD-883, METHOD 1014, TEST CONDITION A
MIL-STD-202, METHOD 211, TEST CONDITION A AND C
EPOXY, HEAT CURED.
t
TERMINAL STRENGTH
MARKING INK
T
MOISTURE RESISTANCE
SOLDERABILITY
MIL-STD 202, METHOD 106, OMIT STEP 7B
MIL-STD-202, METHOD 208, 95% COVERAGE
MIL-STD-202, METHOD 2002, METHOD 215
SOLVENT RESISTANCE
PART NUMBERING SYSTEM
FREQUENCY
EXTENDED
SERIES
SYMMETRY
OPTIONS
FREQUENCY
IN MHz
STABILITY
TEMPERA TURE
100
050
025
±100 PPM
±50 PPM
±25 PPM
-
-
-
-
TR TA PE A ND REEL*
GW GULL WING
3.3 +3.3 V
CO1
CO13
(14 PIN DIP)
(8 PIN DIP)
EXT
T TIGHT SY MMETRY
* Available for Gull Wing only
EXAMPLE: CO1100-20.000-EXT-T, CO13050-32.000-T-TR
Raltron Electronics Corporation 10651 NW 19th St. Miami, Florida 33172 U.S.A.
Tel: 305-593-6033 Fax: 305-594-3973 e-mail: sales@raltron.com Internet: http://www.raltron.com