THROUGH HOLE CLOCK OSCILLATORS - TTL COMPATIBLE
SERIES CO1 AND CO13
FEATURES
STANDARD 8 AND 14 PIN DIP PACKAGE
TOLERANCE AND STABILITY TO ±25 PPM
LOW COST
AVAILABLE IN 3.3 VOLT
SPECIFICATIONS
SERIES
CO1
14 PIN DIP
CO13
8 PIN DIP
PACKAGE
FREQUENCY RANGE
500.00 KHz TO 125.00 MHz
CO1100 : ±100 ppm
CO1050 : ±50 ppm
CO1025 : ±25 ppm
500.00 KHz TO 125.00 MHz
CO13100 : ±100 ppm
CO13050 : ±50 ppm
CO13025 : ±25 ppm
FREQUENCY STABILITY†
0° C TO +70° C STANDARD
-40° C TO +85° C EXTENDED
0° C TO +70° C STANDARD
-40° C TO +85° C EXTENDED
OPERATING TEMPERATURE RANGE
STORAGE TEMPERATURE RANGE
VOLTAGE††
-55° C TO +125° C
-55° C TO +125° C
+5 VDC ±0.5 VDC
+5 VDC ±0.5 VDC
500.00 KHz TO 2.999 MHz: 30 mA
3.00 MHz TO 31.999 MHz: 50 mA
32.00 MHz TO 79.999 MHz: 70 mA
80.00 MHz TO 125.00 MHz: 80 mA
500.00 KHz TO 2.999 MHz: 30 mA
3.00 MHz TO 31.999 MHz: 50 mA
32.00 MHz TO 79.999 MHz: 70 mA
80.00 MHz TO 125.00 MHz: 80 mA
INPUT
CURRENT (MAX)
SYMMETRY
(AT 1.4 VDC LEVEL)
40 TO 60% NORMAL
45 TO 55% TIGHT
40 TO 60% NORMAL
45 TO 55% TIGHT
UNDER 9 MHz : ±15 ns MAX
9 MHz TO 32 MHz : ±10 ns MAX
32 MHz TO 80 MHz : ±6 ns MAX
80 MHz TO 125 MHz : ±4 ns MAX
+0.5 V MAX, SINK TO 16 mA
+2.4 V MIN, SOURCE 0.4 mA
1 TO 10 TTL STANDARD
UNDER 9 MHz : ±15 ns MAX
9 MHz TO 32 MHz : ±10 ns MAX
32 MHz TO 80 MHz : ±6 ns MAX
80 MHz TO 125 MHz : ±4 ns MAX
+0.5 V MAX, SINK TO 16 mA
+2.4 V MIN, SOURCE 0.4 mA
1 TO 10 TTL STANDARD
RISE AND FALL TIME
(0.4 - 2.4 VDC)
OUTPUT
LOGIC "0" LEVEL
LOGIC "1" LEVEL
LOAD†††
35
† FREQUENCY STABILITY INCLUSIVE OF ROOM TOLERANCE ,
FREQUENCY STABILITY OVER TEMPERATURE, 10% POWER SUPPLY VARIATION, AGING, SHOCK, AND VIBRATION
†† +3.3 VOLT VERSION IS AVAILABLE. CONSULT RALTRON FOR SPECIFICATIONS
††† OUTPUT LOADS ALSO AVAILABLE AT 15 pF, 30 pF AND 50 pF. CONSULT RALTRON FOR SPECIFICATIONS
ENVIRONMENTAL AND TECHNICAL CONDITIONS
OUTPUT WAVEFORM
ENVIRONMENTAL
TEMPERATURE CYCLE MIL-STD 883, METHOD 1010, 10 CYCLES -20° C TO 85° C
tf
tr
VCC
SHOCK
MIL-STD-202, METHOD 213, TEST CONDITION C
MIL-STD-202, METHOD 204, TEST CONDITION A
VIBRATION
RESISTANCE TO
SOLDERING HEAT
"1" LEVEL
+2.5 VDC
+1.5 VDC
+0.5 VDC
MIL-STD-202, METHOD 210, TEST CONDITION B
HUMIDITY
85% RELATIVE HUMIDITY AT 85° C 250 HOURS
MECHANICAL
"0" LEVEL
GROSS LEAK TEST
FINE LEAK TEST
TERMINAL STRENGTH
MARKING INK
MIL-STD-883, METHOD 1014, TEST CONDITION C
MIL-STD-883, METHOD 1014, TEST CONDITION A
MIL-STD-202, METHOD 211, TEST CONDITION A AND C
EPOXY, HEAT CURED.
0 VDC
t
T
MOISTURE RESISTANCE MIL-STD 202, METHOD 106, OMIT STEP 7B
SOLDERABILITY MIL-STD-202, METHOD 208, 95% COVERAGE
SOLVENT RESISTANCE MIL-STD-202, METHOD 2002, METHOD 215
PART NUMBERING SYSTEM
FREQUENCY
STABILITY
EXTENDED
TEMPERATURE
SERIES
FREQUENCY
IN MHz
SYMMETRY
-
OPTIONS
TR TAPE AND REEL
-
-
-
100
050
025
±100 PPM
±50 PPM
±25 PPM
CO1
CO13
(14 PIN DIP)
(8 PIN DIP)
EXT
T
TIGHT SYMMETRY GW GULL WING
3.3V +3.3 V
EXAMPLE: CO1100-20.000-EXT-T, CO13050-32.000-T-TR
Raltron Electronics Corporation 10651 NW 19th St. Miami, Florida 33172 U.S.A.
Tel: 305-593-6033 Fax: 305-594-3973 e-mail: sales@raltron.com Internet: http://www.raltron.com