5秒后页面跳转
CM4072 PDF预览

CM4072

更新时间: 2024-11-18 04:12:23
品牌 Logo 应用领域
CALMIRCO 驱动器稳压器
页数 文件大小 规格书
11页 304K
描述
Low Noise Charge Pump/Linear Regulator LED Driver

CM4072 数据手册

 浏览型号CM4072的Datasheet PDF文件第2页浏览型号CM4072的Datasheet PDF文件第3页浏览型号CM4072的Datasheet PDF文件第4页浏览型号CM4072的Datasheet PDF文件第5页浏览型号CM4072的Datasheet PDF文件第6页浏览型号CM4072的Datasheet PDF文件第7页 
PRELIMINARY  
CM4072  
Low Noise Charge Pump/Linear Regulator LED Driver  
Features  
Product Description  
The CM4072 Low-noise Charge Pump / LDO Regulator is  
designed to power white backlight LEDs used in main dis-  
plays or camera flash LEDs in wireless handsets. The 5V  
output provides up to 100mA continuous current for input  
voltages from 3.0V to 5.5V, and up to 200mA for a nar-  
rower range. This is accomplished with an integrated  
charge pump that boosts the input voltage before feeding  
it to an internal LDO linear regulator. The CM4072 oper-  
ates with excellent power supply ripple rejection while  
maintaining good power efficiency. The device utilizes two  
external capacitors and operates at 250kHz. Separate  
analog and digital ground pins are provided for the charge  
pump and the rest of the circuitry to eliminate ground  
noise feed-through from the charge pump to the regulated  
output.  
Low noise regulator with integrated charge pump  
voltage-booster  
5V output with input voltage as low as 2.8V  
Charge pump can also power an external LDO  
Low noise in 20Hz to 20kHz audio band  
Up to 200mA continuous output current  
Low operating and shutdown currents  
Stable with low-ESR ceramic or tantalum capaci-  
tors  
Over-current and over-temperature protection  
10-lead TDFN package, 3mm x 3mm  
Lead-free versions available  
Applications  
The CM4072 provides both overcurrent and thermal over-  
load protection. Two enable inputs provide flexibility in  
powering down the device. To maximize power saving in  
shutdown mode, both enable inputs should be at a logic  
low level. For applications that require the 5V output to be  
re-established with minimum delay after shutdown, the  
charge pump can be left enabled while the regulator is  
disabled. The CMOS LDO regulator features low quies-  
cent current even at full load, making it very suitable for  
power sensitive applications.  
White backlight LEDs for main display in wireless  
handsets and LCD modules  
Power flash LEDs for camera phones  
3.3V to 5V conversion in PCMCIA cards, PCI  
Express Cards, other applications needing 5V  
5V analog supply for audio codec in notebook  
computers, PDAs, MP3 players, etc  
A bypass pin is provided to further minimize noise by con-  
necting an external capacitor between this pin and  
ground.  
The CM4072 is available in a 10-lead TDFN package,  
with optional lead-free finishing, and is ideal for space crit-  
ical applications.  
Typical Application  
Simplified Block Diagram  
1
CHARGE PUMP  
DGND  
CP-  
C
10  
9
P
2
3
V
IN  
1
2
3
4
5
10  
9
C
CP+  
P
VCP  
1μF  
+
V
IN  
C
S
ENABLE CHARGE  
PUMP  
CM4072  
TDFN-10  
8
CONTROL  
CIRCUIT  
7
6
+
C
2.2μF  
S
EN_CP  
7
EN_LDO  
CS  
ENABLE LDO  
6
+
0.1μF*  
C
BYP  
8
VREF  
LDO  
VOUT  
*Optional  
PWM  
0-200kHz  
5
4
BYP  
GND  
© 2005 California Micro Devices Corp. All rights reserved.  
11/08/05  
490 N. McCarthy Blvd., Milpitas, CA 95035-5112  
Tel: 408.263.3214  
Fax: 408.263.7846  
www.cmd.com  
1

与CM4072相关器件

型号 品牌 获取价格 描述 数据表
CM4072-50DE CALMIRCO

获取价格

Low Noise Charge Pump/Linear Regulator LED Driver
CM4072-50DF CALMIRCO

获取价格

Low Noise Charge Pump/Linear Regulator LED Driver
CM40A CML

获取价格

T-2 Telephone Slide Base - Type 3
CM40P03U APPLIED POWER

获取价格

TO-252
CM41 CML

获取价格

T-3 1/4 Miniature Bayonet Base
CM415 CITIZEN

获取价格

TUNING FORK CRYSTAL UNIT (SMD ? Ceramic Package)
CM42 CML

获取价格

T-3 1/4 Miniature Bayonet Base
CM4-20 ETC

获取价格

Optoelectronic
CM420455 ETC

获取价格

THYRISTOR MODULE|DOUBLER|HALF-CNTLD|POSITIVE|400V V(RRM)|55A I(T)
CM420855 POWEREX

获取价格

SCR/Diode POW-R-BLOK⑩ Modules 55 Amperes/800