CCM03 MK II
A new range of CCM03 connectors
have been developed to interface with
SIM/SAM cards as defined by GSM11-
11 and ENV1375-1. The connectors are
available with either hinged covers or
fixed covers and have been designed to
minimize the amount of space needed
for PCB mounting.
Construction
Contacts
Plating
Copper alloy
Contact area : Gold alloy inlay or gold over nickel
Terminals : Tin lead (2µ min)
High temp. thermoplastic UL 94V-0 rated
Stainless steel
Moldings
Slide lock/metal cover
Mechanical Data
Features
Number of Contacts
6 or 8
Mechanical life, hinged cover
Mechanical life, fixed cover
Card insertion force
10,000 cycles min
50,000 cycles
Hinged cover: 1 N max
Fixed cover: 3 N max
Hinged Cover
• Available with 6 or 8 contacts, with or
without PCB locating pegs.
Card extraction force
Hinged cover: 1 N max
• Available with insulated card presence
switch.
Fixed cover: 0.80 N min / 3 N max
Contact force
Slide locking force
Vibration
0.25 N min / 0.50 N max
2 N min / 6 N max
Frequency 10 to 500 Hz. Acceleration 50m/s
• The cover springs open when
unlocked while the card is in place.
2
Duration 6 hours - amplitude 0,35 mm
Max electrical discontinuity 1µs
Peak value 500 m/s – Duration 11 ms
3 shocks in each direction of each axis
Max electrical discontinuity 1 µs
• The molding is polarized so that the
cover can only be closed if the card is
correctly inserted.
2
Shock
• The cover can be replaced without
removing the connector from the PCB.
Contact Electrical Data
• Inspection slots allow an electrical test
to be made without opening the cover.
Insulation resistance
Resistance
1,000 MΩ min
100 mΩ max
Current rating
Dielectric strength
10 µA min / 1 A max
750 Vrms min
• The overall height of the connector is
only 2,5 mm. The amount of space
needed to mount the connector is just
29,65 mm x 17,2 mm.
Switch Electrical Data
Card detection switch
Contact resistance
Dielectric strength
Current rating
Normally open
100 mΩ max
250 Vrms min
1 mA min / 10m A max
0.2 VA
Fixed Cover
• Available with 6 or 8 contacts.
• The overall height of the connector is
2,85 mm max. Only 25,5 mm x 17,2
mm of board space is required to
mount the connector.
Maximum power
Environmental Data
Operating temperature
Soldering temperature
-40°C to +85°C
Temperature/time profile acc. to CECC00802
para. 6.1, Fig. 3 with peak temperature 250°C
General
• With tape and reel packaging as stan-
dard, the connectors are designed to
be automatically pick-and-placed.
Damp heat
Salt mist
IEC 512 test number 11c (10 days)
IEC 512 test number 11f (96 hours)
Packaging
• The high temperature thermoplastic
moldings are suited for infrared and
convection soldering processes.
Quantity per reel, see table next page.
• By using an inlay finish in the contact
area the life of the precious metal is
extended by over 10 times that of
standard gold plating.
• Robustly formed printed circuit tails
allow a co-planarity of 0,05 mm to
be maintained.
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com
19