ECCN 5E002 TSPA - Technology / Software Publicly Available
CC430F614x
CC430F514x
CC430F512x
www.ti.com
SLAS555 –JUNE 2012
MSP430 SoC With RF Core
1
FEATURES
23
•
True System-on-Chip (SoC) for Low-Power
– Embedded Emulation Module (EEM)
Wireless Communication Applications
Wide Supply Voltage Range: 1.8 V to 3.6 V
Ultralow Power Consumption:
•
High-Performance Sub-1-GHz RF Transceiver
Core
•
•
–
–
–
Same as in CC1101
–
–
–
–
–
–
CPU Active Mode (AM): 160 µA/MHz
Standby Mode (LPM3 RTC Mode): 2.0 µA
Off Mode (LPM4 RAM Retention): 1.0 µA
RTC Only Mode (LPM3.5): 1.0 µA
Wide Supply Voltage Range: 2.0 V to 3.6 V
Frequency Bands: 300 MHz to 348 MHz,
389 MHz to 464 MHz, and 779 MHz to
928 MHz
–
–
Programmable Data Rate From 0.6 kBaud
to 500 kBaud
Shutdown Mode (LPM4.5): 0.3 µA
Radio in RX: 15 mA, 250 kbps, 915 MHz
High Sensitivity (-117 dBm at 0.6 kBaud,
‑111 dBm at 1.2 kBaud, 315 MHz, 1% Packet
Error Rate)
•
MSP430™ System and Peripherals
–
–
–
16-Bit RISC Architecture, Extended
Memory, up to 20-MHz System Clock
–
–
–
–
Excellent Receiver Selectivity and Blocking
Performance
Wake-Up From Standby Mode in Less
Than 6 µs
Programmable Output Power Up to
+12 dBm for All Supported Frequencies
Flexible Power Management System With
SVS and Brownout
2-FSK, 2-GFSK, and MSK Supported as well
as OOK and Flexible ASK Shaping
–
–
Unified Clock System With FLL
16-Bit Timer TA0, Timer_A With Five
Capture/Compare Registers
Flexible Support for Packet-Oriented
Systems: On-Chip Support for Sync Word
Detection, Address Check, Flexible Packet
Length, and Automatic CRC Handling
–
16-Bit Timer TA1, Timer_A With Three
Capture/Compare Registers
–
–
Hardware Real-Time Clock
–
Support for Automatic Clear Channel
Assessment (CCA) Before Transmitting (for
Listen-Before-Talk Systems)
Two Universal Serial Communication
Interfaces
–
–
Digital RSSI Output
–
–
USCI_A0 Supports UART, IrDA, SPI
USCI_B0 Supports I2C™, SPI
Suited for Systems Targeting Compliance
With EN 300 220 (Europe) and
FCC CFR Part 15 (US)
–
10-Bit A/D Converter With Internal
Reference, Sample-and-Hold, and Autoscan
Features (Only CC430F614x and
CC430F514x)
–
–
Suited for Systems Targeting Compliance
With Wireless M-Bus Standard
EN 13757‑4:2005
–
–
Comparator
Support for Asynchronous and
Integrated LCD Driver With Contrast
Control for up to 96 Segments (Only
CC430F614x)
Synchronous Serial Receive/Transmit Mode
for Backward Compatibility With Existing
Radio Communication Protocols
–
128-Bit AES Security Encryption and
Decryption Coprocessor
•
•
Family Members Summarized in Table 1
For Complete Module Descriptions, See the
CC430 Family User's Guide (SLAU259)
–
–
–
32-Bit Hardware Multiplier
Three-Channel Internal DMA
Serial Onboard Programming, No External
Programming Voltage Needed
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
3
MSP430 is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2012, Texas Instruments Incorporated