BPW-8310
100W AC-DC Open Frame ATX Power Supply
Requiring 18CFM Forced Air Cooling
14.14
0.55
E
TRANSFORMER
0V
24V
15.24
14.44
0.4
1.5
3.87
screw
6.85
1.4
System chassis
Use #6-32 screw
Protrusion limits
2.5mm
x4
Features
*Input Voltage: 85~264VAC
*Input Frequency: 47~63Hz
*Input Current: 3A at 115VAC or 1.5A at 230VAC max.
*Inrush Current: < 30A at 115VAC input or < 60A at 230VAC
input at 25oC cold start
Safety Standards
*Safety: UL 1950 / CSA 22.2 No.234 / VDE EN60950
*EMI: FCC class B / EN55022 B
*EMS: Level 3 of IEC-802, 803, 804, 805
PIN
1~3
Output
+5V
GND
PIN
1
Output
PWR On/Off
GND
*Load Range: With the +5V output set between 5.08~5.13V
and all output at 60% rated load, while the other outputs are
within the accuracy range; max. total combined output power
on the +3.3V and +5V rails is 70W, with the max. load not
exceeding 120W
*Ripple and Noise: Peak to peak ripple and noise is < 50mV
for +5V and +3.3V outputs, 120mV for +5Vsb, < 120mV for
+12V, and 200mV for -12V at rated load and nominal input
*Line Regulation: < +/-1% for rated load with a +/-10%
change in input voltage
4~8
2
9~10
11~13
14
+12V
+3.3V
-12V
3
+5Vsb
Output Min. Rated Max.
Voltage Load Load
Tolerance
4.9~5.1V
6A 11.25~12.75V
Load
+5V
+12V
-12V
+3.3V
+5Vsb
1A
0A
0A
0A
0A
8A
2.5A
0.5A
8A
14A
*Load Regulation: < +/-2% for +5V, < +7~-3% for +12V,
< +8~-3% for -12V, < +/-5% for +3.3V with measured output
load changing within +/-40% and 60% rated load, while
keeping other outputs at 60% rated load
1A
12A
----
-11.25~-13V
3.1~3.5V
4.8~5.2V
0.75A
*Hold Up Time: > 16ms at 115VAC input and rated load
*Power ON/OFF: Turns on power supply when power on/off
pin is connected to secondary GND
*Efficiency: > 70% at nominal line and rated load
*Altitude: 10,000 feet
*Protection: Hiccup mode against short circuit or over load
conditions auto recovery when fault conditions are removed
*Temperature: 0~+50oC, output power is 100W with 6CFM
forced air, 120W with 18CFM forced air (operating);
-40~+85oC (storage)
*Connectors:
AC Input: Molex 5273-05A withdraw 2-pin or equivalent device
DC Output: TB2 is Molex 5273-14A or equivalent device; TB3
is Molex 5045-03A or equivalent device
*Dimensions: 8.38 x 15.24 x 3.97 cm. Tolerance at +/-0.4mm
www.boser.com.tw