Datasheet
AC/DC Converter
PWM Type DC/DC Converter IC
Built-in a Switching MOSFET
BM2P0161-Z BM2P0361-Z
General Description
Key Specification
◼ Operating Power Supply Voltage Range:
The PWM type DC/DC converter for AC/DC provides an
optimal system for all products that require an electrical
outlet.
VCC:
8.9 V to 26.0 V
730 V (Max)
DRAIN:
BM2P0161-Z and BM2P0361-Z support both isolated and
non-isolated devices, enabling simpler design of various
types of low power consumption electrical converters.
The built-in 730 V starter circuit contributes to low-power
consumption.
◼ Circuit Current (ON)1:
BM2P0161-Z: 0.90 mA (Typ)
BM2P0361-Z: 0.65 mA (Typ)
0.30 mA (Typ)
◼ Circuit Current (ON)2:
◼ Oscillation Frequency1:
65 kHz (Typ)
Power supply can be designed flexibly by connecting
current sensing resistor for the switching externally.
Current is restricted in each cycle and excellent
performance is demonstrated in bandwidth and transient
response since current mode control is utilized. The
switching frequency is 65 kHz. At light load, the switching
frequency is reduced and high efficiency is achieved. A
frequency hopping function that contributes to low EMI is
also included on chip.
◼ Operating Ambient Temperature: -40 °C to +105 °C
◼ MOSFET ON Resistance:
BM2P0161-Z: 1.0 Ω (Typ)
BM2P0361-Z: 3.0 Ω (Typ)
Package
W (Typ) x D (Typ) x H (Max)
9.27 mm x 6.35 mm x 8.63 mm
Pitch 2.54 mm
DIP7K
DIP7WF
9.35 mm x 6.35 mm x 8.10 mm
Pitch 2.54 mm
Design can be easily implemented because includes a
730 V switching MOSFET.
Feature
◼ PWM Current Mode Control
◼ Built-in Frequency Hopping Function
◼ Burst Operation When Load is Light
◼ Frequency Reduction Function
◼ Built-in 730 V Starter Circuit
◼ Built-in 730 V Switching MOSFET
◼ VCC Pin Under-Voltage Protection
◼ VCC Pin Over-Voltage Protection
◼ SOURCE Pin Open Protection
◼ SOURCE Pin Short Protection
◼ SOURCE Pin Leading Edge Blanking Function
◼ Per-Cycle Over-Current Protection Circuit
◼ Over Current Protection AC Voltage Compensation
Circuit
Application
For AC Adapters, TV and Household Appliances (Vacuum
Cleaners, Humidifiers, Air Cleaners, Air Conditioners, IH
Cooking Heaters, Rice Cookers, etc.)
◼ Soft Start
◼ Secondary Over-Current Protection Circuit
Typical Application Circuit
+
FUSE
AC85V
Diode
Bridge
to
Filter
AC265V
-
DRAIN
FADJ
VCC
FB
DRAIN
ERROR
AMP
SOURCE
GND
〇Product structure : Silicon monolithic integrated circuit 〇This product has no designed protection against radioactive rays.
www.rohm.com
© 2018 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 14 • 001
TSZ02201-0F1F0A200310-1-2
08.Apr.2022 Rev.007
1/22