Datasheet
AC/DC Drivers
PWM type DC/DC converter IC
Included 650V MOSFET
BM2PXX3 Series
●General
The PWM type DC/DC converter (BM2PXX3) for
●Features
PWM frequency : 65kHz
PWM current mode method
AC/DC provide an optimum system for all products
that include an electrical outlet.
BM2PXX3 supports both isolated and non-isolated
devices, enabling simpler design of various types of
low-power electrical converters.
BM2PXX3 built in a HV starter circuit that tolerates
650V, it contributes to low-power consumption.
With current detection resistors as external devices, a
higher degree of design freedom is achieved. Since
current mode control is utilized, current is restricted in
each cycle and excellent performance is demonstrated
in bandwidth and transient response.
Burst operation when load is light
Frequency reduction function
Built-in 650V start circuit
Built-in 650V switching MOSFET
VCC pin under voltage protection
VCC pin overvoltage protection
SOURCE pin Open protection
SOURCE pin Short protection
SOURCE pin Leading-Edge-Blanking function
Per-cycle over current protection circuit
Soft start
The switching frequency is 65 kHz. At light load, the
switching frequency is reduced and high efficiency is
achieved.
A frequency hopping function is also on chip, which
contributes to low EMI.
Secondary Over current protection circuit
●Package
DIP7
9.20mm×6.35mm×4.30mm pitch 2.54mm
(Typ.) (Typ.) (Typ.) (Typ.)
We can design easily, because BM2PXX3 includes
the switching MOSFET.
●Basic specifications
Operating Power Supply Voltage Range:
VCC 8.9V to 26.0V DRAIN:~650V
Operating Current: Normal Mode
BM2P013: 0.950mA (Typ.)
●Applications
BM2P033: 0.775mA (Typ.)
AC adapters and household appliances (vacuum
cleaners, humidifiers, air cleaners, air conditioners, IH
cooking heaters, rice cookers, etc.)
BM2P053: 0.600mA (Typ.)
BM2P093: 0.500mA (Typ.)
Burst Mode: 0.400mA (Typ.)
Oscillation Frequency:
Operating Temperature:
MOSFET ON Resistance:
65kHz (Typ.)
- 40 oC to +10 oC
●Line up
BM2P013: 1.4Ω (Typ.)
BM2P033: 2.4Ω (Typ.)
BM2P053: 4.0Ω (Typ.)
BM2P093: 8.5Ω (Typ.)
Product
MOSFET ON Resistor
●Application circuit
1.4Ω
2.4Ω
4.0Ω
BM2P013
BM2P033
BM2P053
BM2P093
+
FUSE
Diode
Bridge
AC
Filter
-
85265Vac
-
8.5Ω
ERROR
AMP
Figure 1.Application circuit
○Product structure:Silicon monolithic integrated circuit ○This product is not designed protection against radioactive rays
.www.rohm.com
TSZ02201-0F2F0A200050-1-2
24. Sep.2015.Rev.007
© 2012 ROHM Co., Ltd. All rights reserved.
1/18
TSZ22111・14・001