Datasheet
AC/DC Converter
PWM Type DC/DC Converter IC
with Integrated Switching MOSFET
BM2P0162T-Z BM2P0163T-Z
General Description
Key Specifications
Operating Power Supply Voltage Range
The PWM type DC/DC converter for AC/DC provides an
optimal system for all products that require an electrical
outlet. These ICs support both isolated and non-isolated
devices and enable simpler designs of various types of a
low power consumption electrical converters.
VCC Pin:
8.9 V to 26.0 V
DRAIN Pin:
650 V (Max)
0.95 mA (Typ)
0.30 mA (Typ)
65 kHz (Typ)
Current at Switching Operation:
Current at Burst Operation:
Switching Frequency:
Operating Temperature Range:
MOSFET ON Resistance:
The built-in 650 V startup circuit contributes to low power
consumption.
-40 °C to +105 °C
1.4 Ω (Typ)
Power supplies can be designed flexibly by connecting a
current detection resistor for the switching externally.
Current is restricted in each cycle and excellent
performances are demonstrated in a bandwidth and
transient response since a current mode control is
utilized. The switching frequency is 65 kHz by a fixed
method. At light load, the frequency is reduced and high
efficiency is achieved. A built-in frequency hopping
function also contributes to low EMI. A built-in 650 V
switching MOSFET makes designs easy.
Package
TO220-7M
W (Typ) x D (Typ) x H (Max)
10.0 mm x 25.4 mm x 4.7 mm
Features
PWM Current Mode Method
Frequency Hopping Function
Burst Operation at Light Load
Frequency Reduction Function
Built-in 650 V Startup Circuit
Built-in 650 V Switching MOSFET
VCC UVLO (Under Voltage Lockout)
VCC OVP (Over Voltage Protection)
Soft Start Function
FB OLP (Over Load Protection)
Over Current Detection Function per Cycle
Over Current Detection AC Voltage Compensation
Function
SOURCE Pin Open Protection Function
SOURCE Pin Short Protection Function
SOURCE Pin Leading Edge Blanking Function
Applications
AC Adapters, Household Appliances (Such as Vacuum
Cleaners, Humidifiers, Air Cleaners, Air Conditioners, IH
Cooking Heaters and Rice Cookers)
Lineup
Part number
Startup Current 2 (Typ)
BM2P0162T-Z
BM2P0163T-Z
3.00 mA
5.00 mA
Typical Application Circuit
Fuse
Diode
Bridge
AC
Input
Filter
Error
AMP
DRAIN
N.C. FADJ GND FB
SOURCE
VCC
〇Product structure : Silicon integrated circuit 〇This product has no designed protection against radioactive rays.
www.rohm.com
TSZ02201-0F1F0A200520-1-2
04.Feb.2019 Rev.001
© 2018 ROHM Co., Ltd. All rights reserved.
1/26
TSZ22111 • 14 • 001