BLP40 AC-DC Series Data Sheet
40 Watts
Features
• RoHS lead-free solder and lead-solder-exempted
products are available
• Industry-standard 3” x 5” footprint
• Main output remote sense
• CE marked to Low Voltage Directive (Pending)
• Compliance to EN61000-4-2/-3/-4/-5/-6/-8
Description
The BLP40 Series’ economical and compact construction provides single or three-output ac-dc power conversion to
meet the requirements of networking and data communications systems, as well as commercial and industrial
configurations.
The BLP40 is rated for convection, as well as forced-air cooling. Full output power is available with external
forced-air cooling. Other features include main-output remote sense and an internal EMI filter.
Single Output Model Selection
NOMINAL OUTPUT
VOLTAGE (VDC)
MIN-MAXIMUM OUTPUT
CURRENT, CONVECTION
MIN-MAXIMUM OUTPUT
PEAK OUTPUT
TOTAL
REGULATION %
RIPPLE & NOISE
MODEL
1
2
3
4
CURRENT
CURRENT
%p-p
BLP40-1005
BLP40-1012
BLP40-1024
5V
1±V
±4V
0 to 5A
0 to ±.1A
0 to 1.1A
0 to 8A
0 to 3.3A
0 to 1.8A
9A
3.7A
1.9A
±±
±±
±±
1
1
1
Triple Output Model Selection
NOMINAL OUTPUT
MIN-MAXIMUM OUTPUT
CURRENT, CONVECTION
MIN-MAXIMUM OUTPUT
PEAK OUTPUT
TOTAL
REGULATION %
RIPPLE & NOISE
MODEL
1
2
3
4
VOLTAGE (VDC)
CURRENT
CURRENT
%p-p
+5V
+1±V
-1±V
0.3 to 3A
0.1 to 1.5A
0.0 to 0.5A
0.3 to 4A
0.1 to ±A
0.0 to 0.7A
5A
3A
1
±±
±5
±5
1
1
1
BLP40-3000
+5V
+15V
-15V
0.3 to 3A
0.1 to 1.5A
0.0 to 0.5A
0.3 to 4A
0.1 to ±A
0.0 to 0.7A
5A
±.5A
1A
±±
±5
±5
1
1
1
BLP40-3003*
* Advanced Product Release
NOTES: 1 10 CFM or 150 LFM (average measurement of six equally-distanced points through a 3.5” x 1.6” cross-sectional area) with power supply mounted
on 0.±5” standoffs. Recommended airflow direction is from the AC side to the DC side.
2 Peak current duration for less than 30 Sec with a maximum duty cycle of 10%.
3 At 25 °C ambient including voltage set point tolerance, line, and load regulation.
4 Maximum peak-to-peak noise expressed as a percentage of output voltage, ±0 MHz bandwidth, and bypass capacitors of 10 μF and 0.1 μF.
Ordering Information:
OPTIONS
SUFFIXES TO ADD TO PART NUMBER
RoHS lead-solder exemption
RoHS compliant for all 6 substances
No RoHS suffix character required.
Add “G” as the last character of the part number.
REV. MAR 31, 2006
Page 1 of 5
www.power-one.com