BLF6G27-100; BLF6G27LS-100
WiMAX power LDMOS transistor
Rev. 02 — 8 July 2010
Product data sheet
1. Product profile
1.1 General description
100 W LDMOS power transistor for base station applications at frequencies from
2500 MHz to 2700 MHz.
Table 1.
Typical performance
Typical RF performance at Tcase = 25 °C in a class-AB production test circuit.
Mode of operation
f
VDS PL(AV) Gp
ηD ACPR885k
ACPR1980k
(dBc)
ACPR5M ACPR10M
(MHz)
(V)
(W)
(dB) (%) (dBc)
(dBc)
(dBc)
BLF6G27-100
1-carrier W-CDMA [1]
1-carrier N-CDMA [2]
BLF6G27LS-100
2500 to 2700
2500 to 2700
28
28
14
14
16.5 23
-
-
−40
−59
17
23 −50 [3]
−65 [3]
-
-
1-carrier W-CDMA [1]
1-carrier N-CDMA [2]
2500 to 2700
2500 to 2700
28
28
14
14
17
17
23
-
-
−41
−60
23 −50 [3]
−65 [3]
-
-
[1] Signal is a one carrier, TM1 W-CDMA signal with 64 DPCH and 100 % clipping. PAR is 9.65 dB at 0.01 % probability on CCDF.
[2] Single carrier IS-95 with pilot, paging, sync and 6 traffic channels (Walsh codes 8 to 13). PAR = 9.7 dB at 0.01 % probability on the
CCDF. Channel bandwidth is 1.2288 MHz.
[3] Measured within 30 kHz bandwidth.
1.2 Features and benefits
Typical 1-carrier W-CDMA performance (single carrier W-CDMA TM1 with 64 DPCH
and 100 % clipping; PAR = 9.65 dB at 0.01 % probability on the CCDF; channel
bandwidth is 3.84 MHz) at a frequency of 2500 MHz, 2600 MHz and 2700 MHz, a
supply voltage of 28 V and an IDq of 900 mA:
Average output power = 14 W
Power gain = 17 dB
Drain efficiency = 23 %
ACPR5M = −41 dBc
Typical 1-carrier N-CDMA performance (single carrier IS-95 with pilot, paging, sync
and 6 traffic channels [Walsh codes 8 to 13]. PAR = 9.7 dB at 0.01 % probability on the
CCDF. Channel bandwidth is 1.2288 MHz) at a frequency of 2500 MHz, 2600 MHz
and 2700 MHz, a supply voltage of 28 V and an IDq of 900 mA:
Average output power = 14 W
Power gain = 17 dB
Drain efficiency = 23 %
ACPR885k = −50 dBc (within 30 kHz bandwidth)