Single-Output LDO Regulators
30V Voltage Resistance
0.1A LDO Regulators
BDxxFA1FP3 series
●General Description
BDxxFA1FP3 series are LDO regulators with output current capability of 0.1A. The output voltages are 3.3V, 5.0V, 5.4V,
and 12.0V with ±1% accuracy. The SOT89-3K package is most suitable for heat dissipation. As protective function to
prevent IC from destruction, this chip has built-in over current protection circuit to protect the device when output is shorted,
and built-in thermal shutdown circuit to protect the IC during thermal over load conditions. This product can be used in
wide variety of digital appliances. These regulators can use ceramic capacitor, which have smaller size and longer life than
other capacitors.
●Package
SOT89-3K
W(Typ) D(Typ)
4.50mm x 4.095mm x 1.60mm
H(Max)
●Features
High accuracy output voltage ±1.0%
Built-in Over current protection circuit (OCP)
Built-in Temperature protection circuit (TSD)
Soft start function
●Key Features
Input power supply voltage range: Vo+3.0V to 25.0V
Output voltage:
Output current:
3.3V, 5.0V, 5.4V, 12.0V
0.1A (Max)
Operating temperature range:
Ta= -25°C to +85°C
●Typical Application Circuit
VCC
VO
COUT
CIN
GND
FIN
CIN,COUT : Ceramic Capacitor
●Ordering Information
B
D
x
x
F
A
1
F
P
3
-
Z
T L
Part
Number
Output voltage Input
Output
Package
Manufacturing Packaging and forming
Voltage Current
Code
specification
33: 3.3V
50: 5.0V
54: 5.4V
J2: 12V
FP3:SOT89-3K
F:30V A1:0.1A
TL : Emboss tape reel
○ Product structure : Silicon monolithic integrated circuit ○This product is not designed to have protection against radioactive rays.
www.rohm.com
TSZ02201-0G2G0A600060-1-2
11.Apr.2016 Rev.004
© 2016 ROHM Co., Ltd. All rights reserved.
1/14
TSZ22111・14・001