Datasheet
Sound Processor with Built-in 2-band Equalizer
BD37513FS
General Description
Key Specifications
BD37513FS is a sound processor with built-in 2-band
equalizer for car audio. The functions are 4ch stereo
input selector, input-gain control, main volume,
loudness, and 4ch fader volume. Moreover, its
“Advanced switch circuit”, which is an original ROHM
technology, can reduce various switching noise (ex.
No-signal, low frequency like 20Hz & large signal
inputs). “Advanced switch” makes control of
microcomputer easier, supporting the construction of a
high quality car audio system.
Power Supply Voltage Range:
Circuit Current (No Signal):
TotalHarmonic Distortion1:
Maximum Input Voltage:
Cross-talk Between Selectors:
Volume Control Range:
Output Noise Voltage 1:
Residual Output Noise Voltage:
Operating Temperature Range:
7.0V to 9.5V
38mA(Typ)
0.001%(Typ)
2.3Vrms(Typ)
-100dB(Typ)
+15dB to -79dB
3.8µVrms(Typ)
1.8µVrms(Typ)
-40°C to +85°C
Package
W(Typ) x D(Typ) x H(Max)
Features
Reduce switching noise of input gain control, mute,
main volume, fader volume, bass, treble, loudness
by using advanced switch circuit.
Built-in
1
differential input selector and
3
single-ended input selectors
Built-in ground isolation amplifier inputs, ideal for
external stereo input.
Built-in input gain controller reduces switching
noise for volume of a portable audio input.
Decrease the number of external components due
to built-in 2-band equalizer filter and loudness filter.
Also, it is possible to control Gv using I2C BUS
control.
SSOP-A20
8.70mm x 7.80mm x 2.01mm
It is possible to adjust the gain of the bass and
treble up to ±20dB with 1 dB step gain adjustment.
Energy-saving design resulting in low current
consumption, by utilizing the Bi-CMOS process. It
has the advantage in quality over scaling down the
power heat control of the internal regulators.
Input terminals and output terminals are organized
and separately laid out to keep the signal flow in
one direction which results in simpler and smaller
PCB layout.
Applications
It is optimal for use in car audio systems. It can also be
used for audio equipment of mini Compo, micro Compo,
TV, etc.
It is possible to control the I2C BUS by 3.3V/5V.
○Product structure:Silicon monolithic integrated circuit ○This product has no designed protection against radioactive rays
www.rohm.com
TSZ02201-0C2C0E100430-1-2
16.Dec.2015 Rev.001
© 2015 ROHM Co., Ltd. All rights reserved.
1/26
TSZ22111・14・001