Power Management Switch IC Series for PCs and Digital Consumer Product
1ch Small Current Output
USB High Side Switch ICs
BD2045AFJ, BD2055AFJ
No.09029EAT04
Description
Single channel high side switch IC for USB port is a high side switch having over current protection used in power supply line
of universal serial bus (USB).
N-channel power MOSFET of low on resistance and low supply current are realized in this IC.
And, over current detection circuit, thermal shutdown circuit, under voltage lockout and soft start circuit are built in.
Features
1) Low on resistance 80mΩ Nch MOSFET Switch.
2) Continuous current load 0.25A
3) Control input logic
Active-Low : BD2045AFJ
Active-High : BD2055AFJ
4) Soft start circuit
5) Over current detection
6) Thermal shutdown
7) Under voltage lockout
8) Open drain error flag output
9) Reverse-current protection when power switch off
10) Power supply voltage range 2.7V to 5.5V
11) TTL Enable input
12) 1.2ms typical rise time
13) 10μA max standby current
14) Operating temperature range -40°C to 85°C
Applications
USB hub in consumer appliances, Car accessory, PC, PC peripheral equipment, and so forth
Lineup
Parameter
BD2045AFJ
0.25
BD2055AFJ
0.25
Continuous current load (A)
Output current at short (A)
Control input logic
0.5
Low
0.5
High
Absolute Maximum Ratings
Parameter
Symbol
VIN
Limits
-0.3 to 6.0
-0.3 to 6.0
-0.3 to 6.0
10
Unit
V
Supply voltage
Enable voltage
/OC voltage
VEN, V/EN
V/OC
V
V
/OC current
IS/OC
VOUT
TSTG
mA
V
OUT voltage
-0.3 to 6.0
-55 to 150
560*1
Storage temperature
Power dissipation
°C
mW
PD
*1 In the case of exceeding Ta = 25°C, 4.48mW should be reduced per 1°C.
This chip is not designed to protect itself against radioactive rays.
*
Operating conditions
Parameter
Symbol
VIN
TOPR
ILO
Limits
2.7 to 5.5
-40 to 85
Unit
V
°C
Operating voltage
Operating temperature
Continuous output current
0
to 250
mA
www.rohm.com
2009.05 - Rev.A
1/12
© 2009 ROHM Co., Ltd. All rights reserved.