Datasheet
1A Variable / Fixed Output
LDO Regulators
BDxxIC0WEFJ / BDxxIC0WHFV
●General Description
BDxxIC0W series devices are LDO regulators with an output current of 1.0A. The output accuracy is ±1% of the output
voltage. Both fixed and variable output voltage devices are available. The output voltage of the variable output voltage
device can be varied from 0.8 to 4.5V using external resistors. Various fixed output voltage devices that do not use external
resistors are also available. These LDO regulators are available in two package types: HTSOP-J8 (4.90mm x 6.00mm x
1.00mm) and HVSOF6 (1.60mm x 3.00mm x 0.75mm), and can be used in a wide variety of digital appliances. These
devices have built in over current protection to protect the device when output is shorted, 0µA shutdown mode and thermal
shutdown circuit to protect the device during over load conditions. These LDO regulators are usable with ceramic capacitors
that enable a smaller layout and longer life.
●Features
+/-1% output voltage accuracy
●Package
HTSOP-J8
HVSOF6
(Typ.)
(Typ.)
(Max.)
4.90mm x 6.00mm x 1.00mm
1.60mm x 3.00mm x 0.75mm
Built-in Over Current Protection circuit (OCP)
Built-in Thermal Shut Down circuit (TSD)
Zero µA Shutdown mode
●Key Specifications
■
■
■
Input Power Supply Voltage range:
Output Voltage range(Variable type):
2.4V to 5.5V
0.8V to 4.5V
Output Voltage(Fixed type):
1.0V/1.2V/1.25V/1.5V
1.8V/2.5V/2.6V/3.0V/3.3V
(1.25V/2.6V:HVSOF6 only)
1.0A (Max.)
■
■
■
Output Current:
Shutdown Current:
Operating Temperature Range:
0 µA (Typ.)
-25 to +85℃
HTSOP-J8
HVSOF6
●Typical Application Circuit
VCC
VO
FB
VCC
VO
COUT
COUT
CIN
CIN
R1
R2
VO_S
EN
EN
GND
FIN
GND
FIN
CIN,COUT : Ceramic Capacitor
CIN,COUT : Ceramic Capacitor
Output voltage variable type
Output voltage fixed type
○Product structure:Silicon monolithic integrated circuit ○This product is not designed with protection against radioactive rays.
www.rohm.com
TSZ02201-0R6R0A600430-1-2
21.Dec.2012 Rev.002
© 2012 ROHM Co., Ltd. All rights reserved.
1/23
TSZ22111・14・001