AZ832
POLARIZED DIP RELAY
SINGLE SIDE STABLE
FEATURES
• Low profile for compact board spacing
• DC coils to 48 VDC
• High sensitivity, 96 mW pickup
• Life expectancy to 20 million operations
• High switching capacity, 60 W, 250 VA
• Fits standard 16 pin IC socket
• Epoxy sealed for automatic wave soldering and cleaning
• Meets FCC Part 68.302 1500 V lightning surge
• Meets FCC Part 68.304 1000 V dielectric
• UL, CUR file E43203
GENERAL DATA
CONTACTS
Life Expectancy
Mechanical
Electrical
Minimum operations
Arrangement
DPDT (2 Form C)
Bifurcated crossbar contacts
2 x 107
1 x 105 at 2 A, 30 VDC or 1 A, 125 VAC
2 x 106 at 1 A, 30 VDC or .5 A, 125 VAC
Ratings
Resistive load:
Max. switched power: 60 W or 250 VA
Max. switched current: 2 A
Max. switched voltage: 250 VDC or 250 VAC
Operate Time (typical) 3 ms at nominal coil voltage
Release Time (typical) 2 ms at nominal coil voltage
(with no coil suppression)
Rated Load
UL
Bounce (typical)
3 ms
2 A at 30 VDC resistive
2 A at 125 VAC resistive
Dielectric Strength
(at sea level)
1500 Vrms contact to coil
1000 Vrms between contact sets
1000 Vrms across contacts
Meets FCC Part 68.302 lightning surge
Meets FCC Part 68.304 V dielectric
Material
Gold plated silver against gold plated silver
< 50 milliohms initially
Resistance
Insulation Resistance 1000 megohms min. at 20°C, 500 VDC,
50% RH
COIL
Dropout
Greater than 10% of nominal coil voltage
Power
Ambient Temperature At nominal coil voltage
At Pickup Voltage
(typical)
Non-Sensitive Coil: 252 mW
Operating
Storage
-40°C (-40°F) to 85°C (185°F)
-40°C (-40°F) to 115°C (239°F)
Standard Coil:
Sensitive Coil:
135 mW
128 mW
Ultra-Sensitive Coil: 96 mW
Vibration
50 g at 10–500 Hz
50 g
Max. Continuous
Dissipation
0.9 W at 20°C (68°F)
Shock
Temperature
Max. 115°C (239°F)
Enclosure
P.B.T. polyester
Tinned copper alloy, P.C.
270°C (518°F)
5 seconds
Terminals
NOTES
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Relay has fixed coil polarity.
80°C (176°F)
4. For complete isolation between the relay’s magnetic fields, it is
recommended that a .197" (5.0 mm) space be provided between
adjacent relays.
Max. Immersion Time 30 seconds
Weight 5 grams
5. Relay adjustment may be affected if undue pressure is exerted
on relay case.
6. Specifications subject to change without notice.
8/2/07W