AZ832P
POLARIZED DIP RELAY
BISTABLE (LATCHING)
FEATURES
• High sensitivity, 42 mW pickup
• Low profile DIP package
• Meets FCC Part 68.302 1500 V lightning surge
• Meets FCC Part 68.304 1000 V dielectric
• Single and dual coil versions
• DC coils to 24 VDC
• High switching capacity, 60 W, 250 VA
• Fits standard 16 pin IC socket
• Epoxy sealed for automatic wave soldering and cleaning
• UL, CUR file E43203
CONTACTS
GENERAL DATA
Arrangement
DPDT (2 Form C)
Bifurcated crossbar contacts
Life Expectancy
Mechanical
Electrical
Minimum operations
2 x 107
1 x 105 at 2 A, 30 VDC or 1 A, 125 VAC
2 x 106 at 1 A, 30 VDC or .5 A, 125 VAC
Ratings
Resistive load:
Max. switched power: 60 W or 250 VA
Max. switched current: 2 A
Max. switched voltage: 250 VDC or 250 VAC
Set Time (typical)
Reset Time (typical)
Bounce (typical)
3 ms at nominal coil voltage
3 ms at nominal coil voltage
3 ms
Rated Load
UL
2 A at 30 VDC resistive
2 A at 125 VAC resistive
Dielectric Strength
(at sea level)
1500 Vrms contact to coil
1000 Vrms between contact sets
1000 Vrms across contacts
Meets FCC Part 68.302 lightning surge
Meets FCC Part 68.304 V dielectric
Material
Gold plated silver against gold plated silver
< 50 milliohms initially
Resistance
Insulation Resistance 1000 megohms min. at 20°C, 500 VDC,
50% RH
COIL
Ambient Temperature At nominal coil voltage
Operating
Storage
-40°C (-40°F) to 85°C (185°F)
-40°C (-40°F) to 115°C (239°F)
Power
At Pickup Voltage
(typical)
Standard coil: 56 mW
Sensitive coil: 42 mW
Vibration
50 g at 10–500 Hz
50 g
Max. Continuous
Dissipation
0.9 W at 20°C (68°F)
Shock
Enclosure
P.B.T. polyester
Tinned copper alloy, P.C.
270°C (518°F)
5 seconds
Temperature
Max. 115°C (239°F)
Terminals
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
NOTES
80°C (176°F)
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Relay has fixed coil polarity.
4. For complete isolation between the relay’s magnetic fields, it is
recommended that a .197" (5.0 mm) space be provided between
adjacent relays.
Max. Immersion Time 30 seconds
Weight 5 grams
5. Relay adjustment may be affected if undue pressure is exerted
on relay case.
6. Specifications subject to change without notice.
8/3/07 W