AZ6 9 2 /AZ6 9 3
10 AMP MINIATURE
POWER RELAY
FEATURES
• Isolation spacing greater than 8 mm
• Dielectric strength 4000 Vrms coil to contact
• Approvals/Standards include UL, VDE, IEC
• Single pole — Forms A, B, C available
• 10 Amp switching
• Life expectancy to 30 million operations
• Epoxy sealed version for automatic wave soldering
and cleaning
• UL, CUR file E44211; VDE 4120–4940–4002/A1
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
30 million operations
1 x 105 at 10 A, 30 VDC or 115 VAC
2 x 105 at 8 A, 250 VAC
Operate Time (typical) 6 ms at nominal coil voltage
CONTACTS
Release Time (typical) 2 ms at nominal coil voltage
Arrangement
SPDT (1 Form C)
SPST (1 Form A and 1 Form B)
(with no coil suppression)
Dielectric Strength
(at sea level for 1 min.) 1000 Vrms between open contacts
4000 Vrms coil to contact
Ratings
Resistive load:
Max. switched power: 300 W or 2500 VA
Max. switched current: 10 A; 64 A for 2 ms
Max. switched voltage: 150* VDC or 380 VAC
UL Rating
10 A at 24 VDC or 115 VAC
1/4 HP 120 VAC motor load
10 A at 250 VAC
Insulation
Resistance
10,000 megohms min. at 20°C, 500 VDC,
50% RH
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature At nominal coil voltage
Operating
Standard: -55°C (-67°F) to 70°C (158°F)
Sensitive: -55°C (-67°F) to 80°C (176°F)
Both: -55°C (-67°F) to 110°C (230°F)
B 300 pilot duty
* If switching voltage is greater than 30 VDC, special
precautions must be taken. Please contact the factory.
Storage
Vibration
0.062" DA at 10–55 Hz
20 g
Material
Silver cadmium oxide
Shock
Resistance
< 30 milliohms initially
(at rated current, voltage drop method)
Enclosure
P.B.T. polyester
Tinned copper alloy, P.C.
270°C (518°F)
5 seconds
Terminals
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
COIL
80°C (176°F)
Power
Max. Immersion Time 30 seconds
At Pickup Voltage
(typical)
Standard coil: 337 mW
Sensitive coil: 234 mW
Weight
17 grams
Max. Continuous
Dissipation
1.9 W at 20°C (68°F) ambient
1.4 W at 40°C (104°F) ambient
NOTES
Temperature Rise
Standard: 40°C (72°F) at nominal
coil voltage
1. All values at 20°C (68°F).
Sensitive: 26°C (47°F) at nominal
coil voltage
2. Relay may pull in with less than “Must Operate” value.
3. Unsealed relays should not be dip cleaned.
4. Specifications subject to change without notice.
Temperature
Max. 110°C (230°F)
7/24/02W