AZ673
MINIATURE
POWER RELAY
FEATURES
• Compact size for dense PCB layouts
• High power contacts (10A) for use in consumer
appliances, HVAC, TV
• Withstands surges of up to 10,000 volts
• Epoxy sealed version available
• Insulation Class B standard
• UL/CUR file E44211
• TÜV file R2134653
GENERAL DATA
CONTACTS
Life Expectancy
Mechanical
Electrical
Arrangement
Ratings
SPST – N.O., SPDT
1 x 107
Non - inductive load:
Max. switched power: 300 W or 2500 VA
Max. switched current: 10A
1 x 105 at 10 A 240 VAC Res.
Operate Time (typical) 15 ms at nominal coil voltage
Max. switched voltage: 150* VDC or 250 VAC
Release Time (typical) 5 ms at nominal coil voltage
*Note: If switching voltage is greater than 30 VDC, special
precautions must be taken. Please contact the factory.
(with no coil suppression)
Dielectric Strength
(at sea level for 1 min.) 4000 Vrms N.O. contact to coil
3000 Vrms N.C. contact to coil
1000 Vrms contact to contact
Rated Load
UL, CUR,
10 A at 250 VAC, general use, 100k
10 A at 30 VDC resistive, 100K
1/8 HP at 125 VAC
10,000 V surge contact to coil
Insulation
Resistance
1000 megohms min. at 20°C,
500 VDC, 50% RH
1/4 HP at 250 VAC
TV-5 at 125 VAC (1 Form A only)
TÜV
10 A at 250 VAC resistive, 100k
10 A at 30 VDC resistive, 100k
Dropout
5% of nominal coil voltage
Ambient Temperature
Operating
Material
Silver cadmium oxide or silver tin oxide
-40°C (-40°F) to 80°C (176°F)
-40°C (-40°F) to 105°C (221°F) sensitive coil
-40°C (-40°F) to 130°C (266°F)
Resistance
< 100 milliohms initially
(6 V, 1A voltage drop method)
Storage
Vibration
1.5mm DA at 10–55 Hz
10 g
COIL
Shock
Power
Enclosure
Plastic
At Pickup Voltage
(typical)
300 mW standard coil
140 mW sensitive coil
Terminals
PC, tinned
250°C (482°F)
5 seconds
80°C
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
Max. Continuous
Dissipation
1.2 W at 20°C (68°F) ambient
Temperature Rise
48°C (86°F) at nominal coil voltage, std. coil
22°C (40°F) at nominal coil voltage, sens. coil
Temperature
Max. 130°C (266°F)
Max. Immersion Time 30 seconds
Weight 12 grams
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
4. Specifications subject to change without notice.
3/24/04W