AZ5
SUBMINIATURE
PC BOARD RELAY
FEATURES
• Subminiature size for high density packaging
• Coil sensitivity to 100 mW
• Extremely low cost
• Coils to 24 VDC
• Epoxy sealed for automatic wave soldering
• 1 Amp and 2 Amp contacts
• Life expectancy to 10 million operations
• Meets FCC Part 68.302 1500 V lightning surge
• Meets FCC Part 68.304 1000 V dielectric
• UL file E43203; CSA file 74120
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
10 million operations
Standard Duty: 5 x 105 at 1 A, 30 VDC Res.
4 x 105 at 0.5 A, 120 VAC Res.
Heavy Duty: 2 x 105 at 2 A, 30 VDC Res.
2 x 105 at 1 A, 120 VAC Res.
CONTACTS
Arrangement
SPDT (1 Form C)
Welded crossbar construction
Operate Time (typical) Standard: 3 ms at nominal coil voltage
Sensitive: 5 ms at nominal coil voltage
Ratings
Light Duty
Resistive load:
Release Time (typical) 1 ms at nominal coil voltage
Max. switched power: 30 W or 60 VA
Max. switched current: 1 A
Max. switched voltage: 150 VDC or 300 VAC
UL Rating: 1 A at 30 VDC
0.5 A at 120 VAC
(with no coil suppression)
Capacitance
Coil to contact: 3.0 pF
Contact to contact: 3.0 pF
Bounce (typical)
At 10 mA contact current
2 ms at operate
Heavy Duty
Max. switched power:
Max. switched current:
60 W or 120 VA
2 A
8 ms at release
Max. switched voltage: 150 VDC or 300 VAC
UL Rating: 2 A at 30 VDC
Dielectric Strength
1250 Vrms coil to contact
1 A at 120 VAC
(at sea level for 1 min.) 500 Vrms between open contacts
Meets FCC Part 68.302 1500 V lightning surge
Meets FCC Part 68.304 1000 V dielectric
Material
Light Duty
Heavy Duty
Silver palladium, gold clad
Silver nickel
Insulation
Resistance
100 megohms min. at 20°C, 500 VDC,
50% RH
Resistance
< 50 milliohms initially
Dropout
Greater than 10% of nominal coil voltage
COIL
Ambient Temperature At nominal coil voltage
Power
At Pickup Voltage
(typical)
Operating
Standard: -25°C (-13°F) to 60°C (140°F)
Standard coil: 220 mW
Sensitive coil: 100 mW
Sensitive: -25°C (-13°F) to 75°C (167°F)
Both: -25°C (-13°F) to 105°C (221°F)
Storage
Max. Continuous
Dissipation
1.1 W at 20°C (68°F) ambient
.8 W at 40°C (104°F) ambient
Vibration
0.062" DA at 10–55 Hz
Temperature Rise
Standard: 40°C (72°F) at nominal
coil voltage
Sensitive: 22°C (40°F) at nominal voltage
Shock
Standard: 10 g
Sensitive: 6 g
Enclosure
P.B.T. polyester
Tinned copper alloy
270°C (518°F)
5 seconds
Temperature
Max. 105°C (221°F)
Terminals
NOTES
Max. Solder Temp.
Max. Solder Time
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Other coil resistances and sensitivities available upon request.
4. Specifications subject to change without notice.
Max. Immersion Time 30 seconds
Weight 3.5 grams
12/13/01W