ANT-2.4-ID
Data Sheet
by
Product Description
3.18 mm
(0.13")
The ID Series, ½-wave center-fed Industrial Dipole
antenna is a weatherized design with industrial
and outdoor applications in mind, such as outdoor
meters, solar panel controls and other sensor
monitoring and control systems requiring a low
cost - but rugged - solution. The plastic and cable
are rated for a wide temperature range and UV
exposure for long term reliability.
Ø9.5 mm
(0.37")
104.4 mm
(4.11")
Two standard cable lengths of 1m and 2m allow
the antenna to be remote mounted in a position to
achieve the best RF performance. An integrated
flange makes mounting the antenna simple.
ID Series antennas attach via a standard SMA or
Part 15 compliant RP-SMA connector. Custom
colors, cable lengths and connectors are available
for volume OEM customers.
Ø14.5 mm
(0.57")
10.4 mm
(0.41")
15.0 mm
(0.59")
Ø3.2 mm
(0.13")
Features
1.0 m
(39.4”)
or
2.0 m
(78.7”)
•ꢀ Weatherized assembly for outdoor installation
•ꢀ UV protection
•ꢀ IP-67 rating*
•ꢀ Wide temperature range
•ꢀ Small size
•ꢀ Outstanding VSWR
•ꢀ Integrated mounting flange
•ꢀ Standard SMA or Part 15 compliant RP-SMA
connector
22.7 mm
(0.90")
12.4 mm
(0.49")
31.2 mm
(1.23")
Ordering Information
Electrical Specifications
ANT-2.4-ID-1000-RPS (1m with RP-SMA connector)
ANT-2.4-ID-1000-SMA (1m with SMA connector)
ANT-2.4-ID-2000-RPS (2m with RP-SMA connector)
ANT-2.4-ID-2000-SMA (2m with SMA connector)
MEC-PSA-ID (Optional PSA adhesive patch)
Center Frequency:
Recom. Freq. Range:
Bandwidth:
2.4GHz
2.35–2.60GHz
250MHz
Wavelength:
VSWR:
½-wave
≤ 1.9 typical
Peak Gain:
3.0dBi max
Contact Linx for custom cable lengths.
Impedance:
50-ohms
Cable:
Connection:
Oper. Temp. Range:
UV Resistance:
1 or 2m of RG-58/U
RP-SMA or SMA
–40°C to +80°C
UL 2556 section 4.2.8.5
or equivalent
*The IP rating applies to the antenna body only. IP ratings on
the product’s enclosure depend on how the mating connector is
implemented.
– 1 –
Revised 8/31/2017