Datasheet > AMIS-710208

AMIS-710208

更新时间： 2024-11-29 03:18:43

阅读下载

中文翻译

获取价格

如果您发现信息不准确，欢迎纠错

AMIS-710208 数据手册

AMIS-710208-A7: 200dpi CIS Module

Data Sheet

1.0 General Description

The AMIS-710208-A7 (PI208MC-A7) is a contact image sensor (CIS) module containing contact image sensors, using MOS image

sensor technology for high-speed performance and high sensitivity. The AMIS-710208-A7 is designed to scan documents with a short

read length of 88mm. The module produces a single stream of sampled analog video proportional to images of a single horizontal line

scan that is stepped vertically down a document page with a resolution of 8 dots per millimeter (dpm) and a width of 88mm.

Applications include fax machines, game systems, variety of mark readers, and other automation equipment requiring document

scanners.

2.0 Key Features

• Light source, lens and sensor are integrated into a single module

• 8dpm resolution, 88mm scanning length

• Up to 176µsec/line scanning speed, with 4MHz pixel rate (see Table 3, Note 2)

• Wide dynamic range

• 660nm light source

• Compact size ≅ 13mm x 25.6mm x 102mm

• Low-power

• Light weight

3.0 Functional Description

The AMIS-710208-A7 imaging array consists of 11 AMIS-720233 (PI3033B) sensors, produced by AMIS, which are cascaded together

to provide 704 photo-detectors (pixels) with their associated multiplex switches, and a digital shift register that controls its sequential

readout. Each sensor is sequentially connected to initiate its scanning process at completion of its predecessor’s scan.

Mounted in the module is a one-to-one graded-indexed micro lens array that focuses the image to be scanned onto the linear array

pixels. The incident image is converted to an electrical signal and then the charge on each pixel is transferred to a common video line.

The charge on each pixel is then converted to a voltage by a single video amplifier. The module output is then available on Pin 1 of the

connector, Vout.

Illumination is by means of an integrated LED light source. All components are housed in a small plastic housing which has a cover

glass that acts as the focal point for the object being scanned. In addition, it protects the imaging array, micro lens assembly and LED

light source from dust.

Inputs and outputs (I/O’s) to and from the module are by an 8-pin connector, located on one end of the module. A cross-section of the

AMIS-710208-A7 module is shown in Figure 1 and a block diagram in Figure 2.

AMI Semiconductor – Jan. 06, M-20507-001

www.amis.com

12 3 4 5 6 7 8

中文翻译

下载PDF

型号	品牌	获取价格	描述	数据表
AMIS-710208-A7	AMI	获取价格	Image Sensor,
AMIS-710214	AMI	获取价格	200dpi Two Level Digital Output Module
AMIS-710216	AMI	获取价格	200dpi Two Level Digital Output Module
AMIS-710223	AMI	获取价格	200dpi CIS Module
AMIS-710223-A6	AMI	获取价格	200dpi CIS Module
AMIS-710224	AMI	获取价格	200dpi CIS Module
AMIS-710224-A6	AMI	获取价格	200dpi CIS Module
AMIS-710225	AMI	获取价格	200dpi CIS Module
AMIS-710226	AMI	获取价格	200dpi CIS Module
AMIS-710227	AMI	获取价格	200dpi CIS Module