Datasheet > AMIS-710216

AMIS-710216

更新时间： 2022-04-23 23:00:11

品牌	Logo	应用领域
AMI		/
页数	文件大小	规格书
9页	353K
描述
200dpi Two Level Digital Output Module

阅读下载

获取价格

如果您发现信息不准确，欢迎纠错

AMIS-710216 数据手册

AMIS-710216: 200dpi Two Level Digital Output Module

Data Sheet

1.0 General Description

The AMIS-710216 (PI216MC-DR) is a contact image sensor (CIS) module with an additional on board circuit that digitizes the analog

pixels from the CIS image sensor to a “background-tracking”, two-level digital output signal. It is based on CIS module, the AMIS-

710209-A6 (PI209M-A6) manufactured by AMIS, but with a shorter read length of 88mm. Hence, its performance is equivalent to the

AMIS-710209-A6 which uses MOS image sensor technology to gain its high-speed performance and high sensitivity. The AMIS-710216

is suitable for scanning documents with width of 88mm and with resolution of 8 dots per millimeter (dpm). It has broad applications, but

it was especially designed for the following areas:

• Where data compression is required, such as in data transmissions

• Where component pin-out count must be kept to a minimum

The background-tracking-digitizing circuits in the AMIS-710216 have been referred to as the “dynamic threshold” two-level A/D

converter. For the purpose of describing the module’s characteristics this “dynamic threshold” processing circuit shall herein be referred

to as the “tracking digitizer”.

2.0 Key Features

• Light source, lens and sensor are integrated into a single module

• 8dpm resolution, 88mm scanning length

• Up to 176µsec/line scanning speed, with 4MHz pixel rate (See Table 3, Note 3)

• Wide dynamic range

• Two-level tracking digital output (“Dynamic Threshold Digitizer”)

• 660nm light source (other colors available)

• Compact size ≅ 13mm x 25.6mm x 102mm

• Low power

• Light weight

3.0 Module Description

Figure 1: Block Diagram of AMIS-710216

AMI Semiconductor – May 06, M-20540-001

www.amis.com

12 3 4 5 6 7...9

下载PDF