5秒后页面跳转
AMIS-710207-A4 PDF预览

AMIS-710207-A4

更新时间: 2022-04-23 23:00:11
品牌 Logo 应用领域
AMI /
页数 文件大小 规格书
7页 306K
描述
200dpi CIS Module

AMIS-710207-A4 数据手册

 浏览型号AMIS-710207-A4的Datasheet PDF文件第2页浏览型号AMIS-710207-A4的Datasheet PDF文件第3页浏览型号AMIS-710207-A4的Datasheet PDF文件第4页浏览型号AMIS-710207-A4的Datasheet PDF文件第5页浏览型号AMIS-710207-A4的Datasheet PDF文件第6页浏览型号AMIS-710207-A4的Datasheet PDF文件第7页 
AMIS-710207-A4: 200dpi CIS Module  
Data Sheet  
1.0 General Description  
The AMIS-710207-A4 (PI207MC-A4) contact image sensor (CIS) module uses MOS image sensor technology for high-speed  
performance and high sensitivity. The AMIS-710207-A4 is suitable for scanning A4 size (216mm) documents with 8 dots per millimeter  
(dpm) resolution. Applications include fax machines, game systems, a variety of mark readers, and other automation equipment  
requiring document scanners.  
2.0 Key Features  
Light source, lens and sensor are integrated into a single module  
8dpm resolution, 216mm scanning length  
Dual LED light source, IR and Red, with a line scan time to 347µsec @ 5MHz  
Wide dynamic range  
Analog output  
Compact size 14.5mm x 19.5mm x 232mm  
Low power  
Light weight  
3.0 Functional Description  
The AMIS-710207-A4 imaging array consists of 27 AMIS-720233 (PI3033B) sensors, produced by AMIS, that are cascaded to provide  
1728 photo-detectors with their associated multiplex switches and a digital shift register that controls its sequential readout. Mounted in  
the module is a one-to-one graded indexed micro lens array that focuses on the image of the scanned documents, then transfers it onto  
the sensors. The on-board amplifier processes the video signal to produce a sequential stream of video at the output pin of the  
AMIS-710207-A4 module.  
Illumination is accomplished by means of integrated LED sources; Red (660nm) and IR (880nm). All components are housed in a small  
plastic housing, which has a cover glass that acts as the focal point for the object being scanned. In addition, it protects the imaging  
array, micro lens assembly and LED light source from dust. Inputs and outputs (I/O) to and from the module are by a 10-pin connector,  
JAE 1L-Z-10P-S125L3-E, located on one end of the module. For the Pin 1 location, see Figure 4, overall view of the module house. A  
cross section of the AMIS-710207-A4 module is shown in Figure 1 and a block diagram in Figure 2.  
AMI Semiconductor – May 06, M-20494-001  
1
www.amis.com  

与AMIS-710207-A4相关器件

型号 品牌 描述 获取价格 数据表
AMIS-710208 AMI 200dpi CIS Module

获取价格

AMIS-710208-A7 AMI Image Sensor,

获取价格

AMIS-710214 AMI 200dpi Two Level Digital Output Module

获取价格

AMIS-710216 AMI 200dpi Two Level Digital Output Module

获取价格

AMIS-710223 AMI 200dpi CIS Module

获取价格

AMIS-710223-A6 AMI 200dpi CIS Module

获取价格