5秒后页面跳转
AM29F040-150FE PDF预览

AM29F040-150FE

更新时间: 2024-11-04 05:26:31
品牌 Logo 应用领域
超微 - AMD 闪存内存集成电路光电二极管
页数 文件大小 规格书
33页 418K
描述
4 Megabit (524,288 x 8-Bit) CMOS 5.0 Volt-only, Sector Erase Flash Memory

AM29F040-150FE 技术参数

是否Rohs认证: 不符合生命周期:Obsolete
零件包装代码:TSOP包装说明:REVERSE, TSOP-32
针数:32Reach Compliance Code:unknown
ECCN代码:3A001.A.2.CHTS代码:8542.32.00.51
风险等级:5.74最长访问时间:150 ns
其他特性:100K WRITE/ERASE CYCLES MIN命令用户界面:YES
数据轮询:YES耐久性:100000 Write/Erase Cycles
JESD-30 代码:R-PDSO-G32JESD-609代码:e0
长度:18.4 mm内存密度:4194304 bit
内存集成电路类型:FLASH内存宽度:8
功能数量:1部门数/规模:8
端子数量:32字数:524288 words
字数代码:512000工作模式:ASYNCHRONOUS
最高工作温度:125 °C最低工作温度:-55 °C
组织:512KX8输出特性:3-STATE
封装主体材料:PLASTIC/EPOXY封装代码:TSOP1-R
封装等效代码:TSSOP32,.8,20封装形状:RECTANGULAR
封装形式:SMALL OUTLINE, THIN PROFILE并行/串行:PARALLEL
电源:5 V编程电压:5 V
认证状态:Not Qualified反向引出线:YES
座面最大高度:1.2 mm部门规模:64K
最大待机电流:0.00002 A子类别:Flash Memories
最大压摆率:0.04 mA最大供电电压 (Vsup):5.5 V
最小供电电压 (Vsup):4.5 V标称供电电压 (Vsup):5 V
表面贴装:YES技术:CMOS
温度等级:MILITARY端子面层:Tin/Lead (Sn/Pb)
端子形式:GULL WING端子节距:0.5 mm
端子位置:DUAL切换位:YES
类型:NOR TYPE宽度:8 mm
Base Number Matches:1

AM29F040-150FE 数据手册

 浏览型号AM29F040-150FE的Datasheet PDF文件第2页浏览型号AM29F040-150FE的Datasheet PDF文件第3页浏览型号AM29F040-150FE的Datasheet PDF文件第4页浏览型号AM29F040-150FE的Datasheet PDF文件第5页浏览型号AM29F040-150FE的Datasheet PDF文件第6页浏览型号AM29F040-150FE的Datasheet PDF文件第7页 
FINAL  
Am29F040  
4 Megabit (524,288 x 8-Bit) CMOS 5.0 Volt-only,  
Sector Erase Flash Memory  
DISTINCTIVE CHARACTERISTICS  
5.0 V ± 10% for read and write operations  
— Minimizes system level power requirements  
Compatible with JEDEC-standards  
Embedded Erase Algorithms  
— Automatically preprograms and erases the chip  
or any combination of sectors  
Embedded Program Algorithms  
— Pinout and software compatible with single-  
power-supply Flash  
— Automatically programs and verifies data at  
specified address  
— Superior inadvertent write protection  
Package options  
Data Polling andToggle Bit feature for detection  
of program or erase cycle completion  
— 32-pin PLCC  
Erase suspend/resume  
— 32-pin TSOP  
— Supports reading data from a sector not being  
erased  
— 32-pin PDIP  
Minimum 100,000 write/erase cycles guaranteed  
High performance  
Low power consumption  
— 20 mA typical active read current  
— 30 mA typical program/erase current  
— 55 ns maximum access time  
Sector erase architecture  
— Uniform sectors of 64 Kbytes each  
Enhanced power management for standby  
mode  
— Any combination of sectors can be erased.  
Also supports full chip erase.  
— <1 µA typical standby current  
— Standard access time from standby mode  
Sector protection  
— Hardware method that disables any combination  
of sectors from write or erase operations  
GENERAL DESCRIPTION  
The Am29F040 is a 4 Mbit, 5.0 Volt-only Flash memory  
organized as 512 Kbytes of 8 bits each. The Am29F040  
is offered in a 32-pin package. This device is designed  
to be programmed in-system with the standard system  
which controls the erase and programming circuitry.  
Write cycles also internally latch addresses and data  
needed for the programming and erase operations.  
Reading data out of the device is similar to reading  
from 12.0 Volt Flash or EPROM devices.  
5.0 V V  
supply. A 12.0 V V  
is not required for  
CC  
PP  
write or erase operations. The device can also be  
reprogrammed in standard EPROM programmers.  
The Am29F040 is programmed by executing the pro-  
gram command sequence. This will invoke the Embed-  
ded Program Algorithm which is an internal algorithm  
that automatically times the program pulse widths and  
verifies proper cell margin. Typically, each sector can  
be programmed and verified in less than one second.  
Erase is accomplished by executing the erase com-  
mand sequence. This will invoke the Embedded Erase  
Algorithm which is an internal algorithm that automati-  
cally preprograms the array if it is not already pro-  
grammed before executing the erase operation. During  
erase, the device automatically times the erase pulse  
widths and verifies proper cell margin.  
The standard Am29F040 offers access times between  
55 ns and 150 ns, allowing operation of high-speed  
microprocessors without wait states. To eliminate bus  
contention the device has separate chip enable (CE),  
write enable (WE) and output enable (OE) controls.  
The Am29F040 is entirely command set compatible  
with the JEDEC single-power-supply Flash standard.  
Commands are written to the command register using  
standard microprocessor write timings. Register con-  
tents serve as input to an internal state machine  
Publication# 17113 Rev: E Amendment/0  
Issue Date: November 1996  

与AM29F040-150FE相关器件

型号 品牌 获取价格 描述 数据表
AM29F040-150FEB AMD

获取价格

4 Megabit (524,288 x 8-Bit) CMOS 5.0 Volt-only, Sector Erase Flash Memory
AM29F040-150FI AMD

获取价格

4 Megabit (524,288 x 8-Bit) CMOS 5.0 Volt-only, Sector Erase Flash Memory
AM29F040-150FIB AMD

获取价格

4 Megabit (524,288 x 8-Bit) CMOS 5.0 Volt-only, Sector Erase Flash Memory
AM29F040-150JC AMD

获取价格

4 Megabit (524,288 x 8-Bit) CMOS 5.0 Volt-only, Sector Erase Flash Memory
AM29F040-150JCB AMD

获取价格

4 Megabit (524,288 x 8-Bit) CMOS 5.0 Volt-only, Sector Erase Flash Memory
AM29F040-150JE AMD

获取价格

4 Megabit (524,288 x 8-Bit) CMOS 5.0 Volt-only, Sector Erase Flash Memory
AM29F040-150JEB AMD

获取价格

4 Megabit (524,288 x 8-Bit) CMOS 5.0 Volt-only, Sector Erase Flash Memory
AM29F040-150JI AMD

获取价格

4 Megabit (524,288 x 8-Bit) CMOS 5.0 Volt-only, Sector Erase Flash Memory
AM29F040-150JIB AMD

获取价格

4 Megabit (524,288 x 8-Bit) CMOS 5.0 Volt-only, Sector Erase Flash Memory
AM29F040-150LE ETC

获取价格

x8 Flash EEPROM