Datasheet > AM29F040-150FIB

AM29F040-150FIB

更新时间： 2024-11-22 03:59:15

品牌	Logo	应用领域
超微 - AMD		闪存内存集成电路光电二极管
页数	文件大小	规格书
33页	418K
描述
4 Megabit (524,288 x 8-Bit) CMOS 5.0 Volt-only, Sector Erase Flash Memory

阅读下载

中文翻译

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

AM29F040-150FIB 技术参数

是否Rohs认证：	不符合	生命周期：	Obsolete
零件包装代码：	TSOP	包装说明：	REVERSE, TSOP-32
针数：	32	Reach Compliance Code：	unknown
ECCN代码：	EAR99	HTS代码：	8542.32.00.51
风险等级：	5.74	Is Samacsys：	N
最长访问时间：	150 ns	命令用户界面：	YES
数据轮询：	YES	耐久性：	100000 Write/Erase Cycles
JESD-30 代码：	R-PDSO-G32	JESD-609代码：	e0
长度：	18.4 mm	内存密度：	4194304 bit
内存集成电路类型：	FLASH	内存宽度：	8
功能数量：	1	部门数/规模：	8
端子数量：	32	字数：	524288 words
字数代码：	512000	工作模式：	ASYNCHRONOUS
最高工作温度：	85 °C	最低工作温度：	-40 °C
组织：	512KX8	输出特性：	3-STATE
封装主体材料：	PLASTIC/EPOXY	封装代码：	TSOP1-R
封装等效代码：	TSSOP32,.8,20	封装形状：	RECTANGULAR
封装形式：	SMALL OUTLINE, THIN PROFILE	并行/串行：	PARALLEL
电源：	5 V	编程电压：	5 V
认证状态：	Not Qualified	反向引出线：	YES
座面最大高度：	1.2 mm	部门规模：	64K
最大待机电流：	0.000005 A	子类别：	Flash Memories
最大压摆率：	0.04 mA	最大供电电压 (Vsup)：	5.5 V
最小供电电压 (Vsup)：	4.5 V	标称供电电压 (Vsup)：	5 V
表面贴装：	YES	技术：	CMOS
温度等级：	INDUSTRIAL	端子面层：	Tin/Lead (Sn/Pb)
端子形式：	GULL WING	端子节距：	0.5 mm
端子位置：	DUAL	切换位：	YES
类型：	NOR TYPE	宽度：	8 mm
Base Number Matches：	1

AM29F040-150FIB 数据手册

FINAL

Am29F040

4 Megabit (524,288 x 8-Bit) CMOS 5.0 Volt-only,

Sector Erase Flash Memory

DISTINCTIVE CHARACTERISTICS

■ 5.0 V ± 10% for read and write operations

— Minimizes system level power requirements

■ Compatible with JEDEC-standards

■ Embedded Erase Algorithms

— Automatically preprograms and erases the chip

or any combination of sectors

■ Embedded Program Algorithms

— Pinout and software compatible with single-

power-supply Flash

— Automatically programs and veriﬁes data at

speciﬁed address

— Superior inadvertent write protection

■ Package options

■ Data Polling andToggle Bit feature for detection

of program or erase cycle completion

— 32-pin PLCC

■ Erase suspend/resume

— 32-pin TSOP

— Supports reading data from a sector not being

erased

— 32-pin PDIP

■ Minimum 100,000 write/erase cycles guaranteed

■ High performance

■ Low power consumption

— 20 mA typical active read current

— 30 mA typical program/erase current

— 55 ns maximum access time

■ Sector erase architecture

— Uniform sectors of 64 Kbytes each

■ Enhanced power management for standby

mode

— Any combination of sectors can be erased.

Also supports full chip erase.

— <1 µA typical standby current

— Standard access time from standby mode

■ Sector protection

— Hardware method that disables any combination

of sectors from write or erase operations

GENERAL DESCRIPTION

The Am29F040 is a 4 Mbit, 5.0 Volt-only Flash memory

organized as 512 Kbytes of 8 bits each. The Am29F040

is offered in a 32-pin package. This device is designed

to be programmed in-system with the standard system

which controls the erase and programming circuitry.

Write cycles also internally latch addresses and data

needed for the programming and erase operations.

Reading data out of the device is similar to reading

from 12.0 Volt Flash or EPROM devices.

5.0 V V

supply. A 12.0 V V

is not required for

write or erase operations. The device can also be

reprogrammed in standard EPROM programmers.

The Am29F040 is programmed by executing the pro-

gram command sequence. This will invoke the Embed-

ded Program Algorithm which is an internal algorithm

that automatically times the program pulse widths and

veriﬁes proper cell margin. Typically, each sector can

be programmed and veriﬁed in less than one second.

Erase is accomplished by executing the erase com-

mand sequence. This will invoke the Embedded Erase

Algorithm which is an internal algorithm that automati-

cally preprograms the array if it is not already pro-

grammed before executing the erase operation. During

erase, the device automatically times the erase pulse

widths and veriﬁes proper cell margin.

The standard Am29F040 offers access times between

55 ns and 150 ns, allowing operation of high-speed

microprocessors without wait states. To eliminate bus

contention the device has separate chip enable (CE),

write enable (WE) and output enable (OE) controls.

The Am29F040 is entirely command set compatible

with the JEDEC single-power-supply Flash standard.

Commands are written to the command register using

standard microprocessor write timings. Register con-

tents serve as input to an internal state machine

Publication# 17113 Rev: E Amendment/0

Issue Date: November 1996

12 3 4 5 6 7...33

中文翻译

下载PDF

与AM29F040-150FIB相关器件

型号	品牌	获取价格	描述	数据表
AM29F040-150JC	AMD	获取价格	4 Megabit (524,288 x 8-Bit) CMOS 5.0 Volt-only, Sector Erase Flash Memory
AM29F040-150JCB	AMD	获取价格	4 Megabit (524,288 x 8-Bit) CMOS 5.0 Volt-only, Sector Erase Flash Memory
AM29F040-150JE	AMD	获取价格	4 Megabit (524,288 x 8-Bit) CMOS 5.0 Volt-only, Sector Erase Flash Memory
AM29F040-150JEB	AMD	获取价格	4 Megabit (524,288 x 8-Bit) CMOS 5.0 Volt-only, Sector Erase Flash Memory
AM29F040-150JI	AMD	获取价格	4 Megabit (524,288 x 8-Bit) CMOS 5.0 Volt-only, Sector Erase Flash Memory
AM29F040-150JIB	AMD	获取价格	4 Megabit (524,288 x 8-Bit) CMOS 5.0 Volt-only, Sector Erase Flash Memory
AM29F040-150LE	ETC	获取价格	x8 Flash EEPROM
AM29F040-150LEB	ETC	获取价格	x8 Flash EEPROM
AM29F040-150PC	AMD	获取价格	4 Megabit (524,288 x 8-Bit) CMOS 5.0 Volt-only, Sector Erase Flash Memory
AM29F040-150PCB	AMD	获取价格	4 Megabit (524,288 x 8-Bit) CMOS 5.0 Volt-only, Sector Erase Flash Memory

与AM29F040-150FIB相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

35
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

26
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

54
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

52

产品中心

服务支持

精选活动

关于我们

帮助中心

AM29F040-150FIB

AM29F040-150FIB 技术参数

AM29F040-150FIB 数据手册

与AM29F040-150FIB相关器件

与AM29F040-150FIB相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

AM29F040-150FIB

AM29F040-150FIB 技术参数

AM29F040-150FIB 数据手册

与AM29F040-150FIB相关器件

与AM29F040-150FIB相关文章

您还可以找

您在本页遇到什么问题？