MicroConverter®, Small Package
12-Bit ADC with Embedded Flash MCU
ADuC814
FUNCTIONAL BLOCK DIAGRAM
FEATURES
ANALOG I/O
ADuC814
6-channel 247 kSPS ADC
12-bit resolution
AIN0
DAC0
DAC1
DAC0
DAC1
BUF
BUF
ADC
CONTROL
LOGIC
DAC
CONTROL
LOGIC
12-BIT
ADC
AIN
MUX
T/H
AIN5
ADC high speed data capture mode
Programmable reference via on-chip DAC for low
level inputs, ADC performance specified to VREF = 1 V
Dual voltage output DACs
12-bit resolution, 15 µs settling time
Memory
8 kbytes on-chip Flash/EE program memory
640 bytes on-chip Flash/EE data memory
Flash/EE, 100 year retention, 100 kcycle endurance
3 levels of Flash/EE program memory security
In-circuit serial downlaod (no external hardware)
256 bytes on-chip data RAM
TEMP
MONITOR
8051-BASED MCU WITH ADDITIONAL
PERIPHERALS
POWER-
ON
RESET
INTERNAL
BAND GAP
V
8 KBYTES FLASH/EE PROGRAM MEMORY
640 BYTES FLASH/EE DATA MEMORY
256 BYTES USER RAM
REF
PROG.
CLOCK
DIVIDER
3 × 16-BIT
TIMER/COUNTERS
1 × WAKE-UP/RTC
TIMER
ON-CHIP MONITORS
POWER SUPPLY
MONITOR
V
BUF
REF
WATCHDOG TIMER
OSC
AND
PLL
C
REF
10 × DIGITAL
UART AND SPI
SERIAL I/O
I/O PINS
XTAL1 XTAL2
Figure 1.
8051 based core
8051 compatible instruction set
32 kHz external crystal,
on-chip programmable PLL (16.78 MHz max)
Three 16-bit timer/counters
11 programmable I/O lines
GENERAL DESCRIPTION
The ADuC814 is a fully integrated 247 kSPS, 12-bit data acquisi-
tion system incorporating a high performance multichannel
ADC, an 8-bit MCU, and program/data Flash/EE memory on a
single chip.
This low power device operates from a 32 kHz crystal with an
on-chip PLL generating a high frequency clock of 16.78 MHz.
This clock is, in turn, routed through a programmable clock
divider from which the MCU core clock operating frequency is
generated.
11 interrupt sources, 2 priority levels
Power
Specified for 3 V and 5 V operation
Normal: 3 mA @ 3 V (core CLK = 2.1 MHz)
Power-down: 15 µA (32 kHz oscillator running)
On-chip peripherals
Power-on reset circuit (no need for external POR device)
Temperature monitor ( 1.5ꢀC accuracy)
Precision voltage reference
The microcontroller core is an 8052 and is compatible with an
8051 instruction. 8 kBytes of nonvolatile Flash/EE program
memory are provided on-chip. 640 bytes of nonvolatile Flash/EE
data memory and 256 bytes RAM are also integrated on-chip.
Time interval counter (wake-up/RTC timer)
UART serial I/O
The ADuC814 also incorporates additional analog functionality
with dual 12-bit DACs, a power supply monitor, and a band gap
reference. On-chip digital peripherals include a watchdog timer,
time interval counter, three timer/counters, and two serial I/O
ports (SPI and UART).
SPI®/I2C® compatible serial I/O
Watchdog timer (WDT), power supply monitor (PSM)
Package and temperature range
28-lead TSSOP 4.4 mm × 9.7 mm package
Fully specified for −40ꢀC to +125ꢀC operation
On-chip factory firmware supports in-circuit serial download
and debug modes (via UART), as well as single-pin emulation
mode via the DLOAD pin. The ADuC814 is supported by a
QuickStart™ Development System.
APPLICATIONS
Optical networking—laser power control
Base station systems—power amplifier bias control
Precision instruments, smart sensors
The part operates from a single 3 V or 5 V supply over the
extended temperature range −40°C to +125°C. When operating
from 3 V supplies, the power dissipation for the part is below
10 mW. The ADuC814 is housed in a 28-lead TSSOP package.
Battery-powered systems, precision system monitors
Rev. A
Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice. No license is granted by implication
or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.326.8703
www.analog.com
© 2003 Analog Devices, Inc. All rights reserved.