SPI-/I2C-Compatible, Temperature Sensor,
4-Channel ADC and Quad Voltage Output
ADT7516/ADT7517/ADT7519
FEATURES
PIN CONFIGURATION
ADT7516: four 12-bit DACs
ADT7517: four 10-bit DACs
ADT7519: four 8-bit DACs
Buffered voltage output
Guaranteed monotonic by design over all codes
10-bit temperature-to-digital converter
10-bit 4-channel ADC
V
-B
-A
1
2
3
4
5
6
7
8
16
15
V
V
-C
-D
OUT
OUT
V
OUT
OUT
ADT7516/
ADT7517/
ADT7519
V
-IN
14 AIN4
REF
CS
13 SCL/SCLK
12 SDA/DIN
11 DOUT/ADD
10 INT/INT
TOP VIEW
(Not to Scale)
GND
V
DD
D+/AIN1
D–/AIN2
9
LDAC/AIN3
DC input bandwidth
Input range: 0 V to 2.28 V
Figure 1.
Temperature range: −40°C to +120°C
Temperature sensor accuracy: 0.5°C typ
Supply range: 2.7 V to 5.5 V
DAC output range: 0 V to 2 VREF
Power-down current: <10 μA
Internal 2.28 VREF option
Double-buffered input logic
Buffered reference input
GENERAL DESCRIPTION
The ADT7516/ADT7517/ADT75191 combine a 10-bit tempera-
ture-to-digital converter, a 10-bit 4-channel ADC, and a quad
12-/10-/8-bit DAC, respectively, in a 16-lead QSOP package.
The parts also include a band gap temperature sensor and a
10-bit ADC to monitor and digitize the temperature reading to
a resolution of 0.25°C.
Power-on reset to 0 V DAC output
Simultaneous update of outputs (LDAC function)
On-chip, rail-to-rail output buffer amplifier
SPI®, I2C®, QSPI™, MICROWIRE™, and DSP compatible
4-wire serial interface
The ADT7516/ADT7517/ADT7519 operate from a single 2.7 V
to 5.5 V supply. The input voltage range on the ADC channels is
0 V to 2.28 V, and the input bandwidth is dc. The reference for
the ADC channels is derived internally. The output voltage of
the DAC ranges from 0 V to VDD, with an output voltage settling
time of 7 μs typical.
SMBus packet error checking (PEC) compatible
16-lead QSOP package
The ADT7516/ADT7517/ADT7519 provide two serial interface
options: a 4-wire serial interface that is compatible with SPI,
QSPI, MICROWIRE, and DSP interface standards, and a 2-wire
SMBus/I2C interface. They feature a standby mode that is
controlled through the serial interface.
APPLICATIONS
Portable battery-powered instruments
Personal computers
Smart battery chargers
Telecommunications systems
Electronic text equipment
Domestic appliances
The reference for the four DACs is derived either internally or
from a reference pin. The outputs of all DACs can be updated
simultaneously using the software LDAC function or the
Process control
LDAC
external
pin. The ADT7516/ADT7517/ADT7519
incorporate a power-on reset circuit, ensuring that the DAC
output powers up to 0 V and remains there until a valid write
takes place.
The wide supply voltage range, low supply current, and SPI-/
I2C-compatible interface of the ADT7516/ADT7517/ADT7519
make them ideal for a variety of applications, including
personal computers, office equipment, and domestic appliances.
1 Protected by U.S. Patent Numbers: 6,169,442; 5,867,012; and 5,764,174.
Rev. B
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.461.3113
www.analog.com
©2006 Analog Devices, Inc. All rights reserved.