SPI/I2C Compatible, Temperature Sensor,
4-Channel ADC and Quad Voltage Output DAC
ADT7516/ADT7517/ADT7519
FEATURES
APPLICATIONS
ADT7516—four 12-bit DACs
ADT7517—four 10-bit DACs
ADT7519—four 8-bit DACs
Buffered voltage output
Portable battery-powered instruments
Personal computers
Smart battery chargers
Telecommunications systems
Guaranteed monotonic by design over all codes
10-bit temperature-to-digital converter
10-bit 4-channel ADC
Electronic text equipment
Domestic appliances
Process control
DC input bandwidth
Input range: 0 V to 2.28 V
PIN CONFIGURATION
Temperature range: –40°C to +120°C
Temperature sensor accuracy of typ: 0.5°C
Supply range: 2.7 V to 5.5 V
DAC output range: 0 V to 2 VREF
Power-down current: 1 µA
Internal 2.28 VREF option
Double-buffered input logic
Buffered reference input
V
V
-B
-A
1
2
3
4
5
6
7
8
16
15
V
V
-C
-D
OUT
OUT
OUT
OUT
ADT7516/
ADT7517/
ADT7519
V
-IN
CS
14 AIN4
REF
13 SCL/SCLK
12 SDA/DIN
11 DOUT/ADD
10 INT/INT
TOP VIEW
(Not to Scale)
GND
V
DD
D+/AIN1
D–/AIN2
9
LDAC/AIN3
Power-on reset to 0 V DAC output
Simultaneous update of outputs (LDAC function)
On-chip rail-to-rail output buffer amplifier
SPI®, I2C®, QSPI™, MICROWIRE™, and DSP compatible
4-wire serial interface
Figure 1.
SMBus packet error checking (PEC) compatible
16-lead QSOP package
GENERAL DESCRIPTION
The ADT7516/ADT7517/ADT75191 combine a 10-bit temp-
erature-to-digital converter, a 10-bit 4-channel ADC, and a
quad 12-/10-/8-bit DAC, respectively, in a 16-lead QSOP
package. The parts also include a band gap temperature sensor
and a 10-bit ADC to monitor and digitize the temperature
reading to a resolution of 0.25°C.
SMBus/I2C interface. They feature a standby mode that is
controlled through the serial interface.
The reference for the four DACs is derived either internally or
from a reference pin. The outputs of all DACs may be updated
simultaneously using the software LDAC function or the
LDAC
external
pin. The ADT7516/ADT7517/ADT7519
The ADT7516/ADT7517/ ADT7519 operate from a single 2.7 V
to 5.5 V supply. The input voltage range on the ADC channels is
0 V to 2.28 V, and the input bandwidth is dc. The reference for
the ADC channels is derived internally. The output voltage of
the DAC ranges from 0 V to VDD, with an output voltage settling
time of 7 ms typical.
incorporate a power-on reset circuit, which ensures that the
DAC output powers up to 0 V and remains there until a valid
write takes place.
The ADT7516/ADT7517/ADT7519’s wide supply voltage range,
low supply current, and SPI/I2C compatible interface make
them ideal for a variety of applications, including personal
computers, office equipment, and domestic appliances.
The ADT7516/ADT7517/ADT7519 provide two serial interface
options: a 4-wire serial interface that is compatible with SPI,
QSPI, MICROWIRE, and DSP interface standards, and a 2-wire
1 Protected by the following U.S. Patent Numbers: 6,169,442; 5,867,012;
5,764174. Other patents pending.
Rev. A
Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice. No license is granted by implication
or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.326.8703
www.analog.com
© 2004 Analog Devices, Inc. All rights reserved.
5秒后页面跳转
AO3401场效应管参数、引脚图、应用原理图
BT131可控硅参数及引脚图、工作原理详解
74LS32芯片参数、引脚图及功能真值表
全球首块英伟达H200交付 黄仁勋“送货上门”
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
