600 mA, Ultralow Noise,
High PSRR, RF Linear Regulator
ADM7154
Data Sheet
FEATURES
TYPICAL APPLICATION CIRCUIT
Input voltage range: 2.3 V to 5.5 V
Maximum load current: 600 mA
Low noise
0.9 µV rms total integrated noise from 100 Hz to 100 kHz
1.6 µV rms total integrated noise from 10 Hz to 100 kHz
Noise spectral density: 1.5 nV/√Hz from 10 kHz to 1 MHz
PSRR of 90 dB from 200 Hz to 200 kHz; 58 dB at 1 MHz,
ADM7154
V
= 3.8V
V
= 3.3V
OUT
IN
VIN
VOUT
C
C
OUT
10µF
IN
10µF
ON
EN
REF
C
REF
OFF
1µF
BYP REF_SENSE
C
BYP
1µF
VREG
GND
C
REG
V
OUT = 3.3 V, VIN = 3.8 V
10µF
Dropout voltage: 120 mV typical at VOUT = 3.3 V, IOUT = 600 mA
Initial accuracy: 0.5%
Accuracy over line, load, and temperature: −2.0% (minimum),
+1.5% (maximum), from −40°C to +85°C
Quiescent current, IGND = 4 mA at no load
Low shutdown current: 0.2 μA
Stable with a 10 µF ceramic output capacitor
Adjustable and fixed output voltage options: 1.2 V, 1.8 V, 2.5 V,
2.8 V, 3.0 V, 3.3 V (16 standard voltages between 1.2 V and
3.3 V available)
8-lead LFCSP and 8-lead SOIC packages
Precision enable
Figure 1. Regulated 3.3 V Output from 3.8 V Input
10k
NOISE FLOOR
1.0µF
3.3µF
10µF
1k
100
10
33µF
100µF
330µF
1000µF
Supported by ADIsimPower tool
1
APPLICATIONS
0.1
0.1
Regulation to noise sensitive applications: PLLs, VCOs, and
PLLs with integrated VCOs
1
10
100
1k
10k
100k
1M
FREQUENCY (Hz)
Communications and infrastructure
Backhaul and microwave links
Figure 2. Noise Spectral Density for Different Values of CBYP
GENERAL DESCRIPTION
The ADM7154 is a linear regulator that operates from 2.3 V to
5.5 V and provides up to 600 mA of load current. Using an
advanced proprietary architecture, it provides high power
supply rejection and ultralow noise, achieving excellent line and
load transient response with only a 10 µF ceramic output capacitor.
The ADM7154 is available in 8-lead, 3 mm × 3 mm LFCSP and
8-lead SOIC packages, making it not only a very compact
solution, but also providing excellent thermal performance for
applications requiring up to 600 mA of load current in a small,
low profile footprint.
There are 16 standard output voltages for the ADM7154. The
following voltages are available in stock: 1.2 V, 1.8 V, 2.5 V, 2.8 V,
3.0 V, and 3.3 V. Additional voltages are available by special
order: 1.3 V, 1.5 V, 1.6 V, 2.0 V, 2.2 V, 2.6 V, 2.7 V, 2.9 V, 3.1 V,
and 3.2 V.
Table 1. Related Devices
Input
Voltage
Output
Fixed/
Model
Current Adj1
Package
ADM7150ACP 4.5 V to 16 V
ADM7150ARD 4.5 V to 16 V
ADM7151ACP 4.5 V to 16 V
ADM7151ARD 4.5 V to 16 V
ADM7155ACP 2.3 V to 5.5 V 600 mA
ADM7155ARD 2.3 V to 5.5 V 600 mA
800 mA
800 mA
800 mA
800 mA
Fixed
Fixed
Adj
Adj
Adj
8-Lead LFCSP
8-Lead SOIC
8-Lead LFCSP
8-Lead SOIC
8-Lead LFCSP
8-Lead SOIC
The ADM7154 regulator typical output noise is 0.9 μV rms from
100 Hz to 100 kHz for fixed output voltage options and
1.5 nV/√Hz for noise spectral density from 10 kHz to 1 MHz.
Adj
1 Adj means adjustable.
Rev. B
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice.
No license is granted by implication or otherwise under any patent or patent rights of Analog
Devices. Trademarksandregisteredtrademarksare the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2014–2016 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com