Ultralow Noise,
200 mA Linear Regulator
ADM7160
Data Sheet
FEATURES
APPLICATION CIRCUIT
PSRR performance of 54 dB at 100 kHz
Ultralow noise independent of VOUT
3 µV rms, 0.1 Hz to 10 Hz
9.5 µV rms, 0.1 Hz to 100 kHz
9 µV rms, 10 Hz to 100 kHz
ADM7160
V
= 2.9V
V
= 2.5V
OUT
IN
1
2
3
VIN
GND
EN
VOUT
5
C
4.7µF
C
IN
OUT
4.7µF
2.5V TO 5V
ON
4
NC
OFF
17 µV rms, 10 Hz to 1 MHz
NC = NO CONNECT
Low dropout voltage: 150 mV at 200 mA load
Maximum output current: 200 mA
Input voltage range: 2.2 V to 5.5 V
Low quiescent and shutdown current
Initial accuracy: 1%
VDD VREF
DVDD
16-BIT/18-BIT ADC
DIGITAL
OUTPUT
1.8V TO 5V
IN+
0V TO V
REF
IN–
VDD
Accuracy over line, load, and temperature: −2.5%/+1.5%
5-lead TSOT package and 6-lead LFCSP package
Figure 1. ADM7160 Powering a 16-Bit/18-Bit ADC
APPLICATIONS
ADC/DAC power supplies
RF, VCO, and PLL power supplies
Post dc-to-dc regulation
GENERAL DESCRIPTION
The ADM7160 is an ultralow noise, low dropout linear
regulator that operates from 2.2 V to 5.5 V and provides up to
200 mA of output current. The low 150 mV dropout voltage at
200 mA load improves efficiency and allows operation over a
wide input voltage range.
The ADM7160 is specifically designed for stable operation
with tiny 1 µF, 30% ceramic input and output capacitors to
meet the requirements of high performance, space constrained
applications.
The ADM7160 is available in tiny 5-lead TSOT and 6-lead
LFCSP packages with 16 fixed output voltage options, ranging
from 1.1 V to 3.3 V. The LFCSP offers a very compact solution
that provides excellent thermal performance for applications
that require up to 200 mA of output current in a small, low
profile footprint.
Using an innovative circuit topology, the ADM7160 achieves
ultralow noise performance without the need for a bypass
capacitor, making the device ideal for noise-sensitive analog
front-end and RF applications. The ADM7160 also achieves
ultralow noise performance without compromising PSRR or
transient line and load performance.
Current-limit and thermal overload protection circuits prevent
damage under adverse conditions. The ADM7160 also includes
an internal pull-down resistor on the EN input.
Rev. 0
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rightsof third parties that may result fromits use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks andregisteredtrademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Technical Support
©2013 Analog Devices, Inc. All rights reserved.
www.analog.com