600 mA, Ultralow Noise,
High PSRR, RF Linear Regulator
ADM7155
Data Sheet
FEATURES
TYPICAL APPLICATION CIRCUIT
Input voltage range: 2.3 V to 5.5 V
Output voltage range: 1.2 V to 3.4 V
Maximum load current: 600 mA
ADM7155
V
= 3.5V
V
= 3.0V
IN
OUT
VIN
VOUT
C
C
OUT
10µF
IN
10µF
ON
Low noise
REF = 1.2V
EN
REF
C
0.9 μV rms total integrated noise from 100 Hz to 100 kHz
1.6 μV rms total integrated noise from 10 Hz to 100 kHz
Noise spectral density: 1.5 nV/√Hz from 10 kHz to 1 MHz
PSRR: >90 dB from 200 Hz to 200 kHz; 57 dB at 1 MHz
Dropout voltage: 120 mV typical at VOUT = 3.3 V, IOUT = 600 mA
Initial accuracy: 0.5ꢀ
Accuracy over line, load, and temperature: −2.0ꢀ (minimum),
+1.5ꢀ (maximum)
Quiescent current, IGND = 4 mA at no load
Low shutdown current: 0.2 ꢁA
REF
OFF
1µF
R1
V
BYP
BYP REF_SENSE
V
= 1.2V × (R1 + R2)/R2
OUT
C
BYP
1µF
R2
1kΩ < R2 < 200kΩ
V
REG
VREG
GND
C
10µF
REG
Figure 1. Regulated 3.0 V Output from 3.5 V Input
10k
NOISE FLOOR
1.0µF
3.3µF
10µF
Stable with a 10 μF ceramic output capacitor
8-lead LFCSP and 8-lead SOIC packages
Precision enable
1k
100
10
33µF
100µF
330µF
1000µF
Supported by ADIsimPower tool
APPLICATIONS
Regulation to noise sensitive applications: PLLs, VCOs, and
PLLs with integrated VCOs
Communications and infrastructure
Backhaul and microwave links
1
0.1
0.1
1
10
100
1k
10k
100k
1M
FREQUENCY (Hz)
Figure 2. Noise Spectral Density for Different Values of CBYP
GENERAL DESCRIPTION
The ADM7155 is an adjustable linear regulator that operates
from 2.3 V to 5.5 V and provides up to 600 mA of load current.
Output voltages from 1.2 V to 3.4 V are possible depending on
the model. Using an advanced proprietary architecture, it
provides high power supply rejection and ultralow noise,
achieving excellent line and load transient response with only a
10 μF ceramic output capacitor.
The ADM7155 is available in 8-lead, 3 mm × 3 mm LFCSP and
8-lead SOIC packages, making it not only a very compact
solution but also providing excellent thermal performance for
applications requiring up to 600 mA of load current in a small, low
profile footprint.
Table 1. Related Devices
Input
Voltage
Output
Model
Current Fixed/Adj1 Package
The ADM7155 is available in four models that optimize power
dissipation and PSRR performance as a function of input and
output voltage. See Table 9 and Table 10 for selection guides.
ADM7150ACP 4.5 V to 16 V 800 mA Fixed
ADM7150ARD 4.5 V to 16 V 800 mA Fixed
ADM7151ACP 4.5 V to 16 V 800 mA Adj
ADM7151ARD 4.5 V to 16 V 800 mA Adj
ADM7154ACP 2.3 V to 5.5 V 600 mA Fixed
ADM7154ARD 2.3 V to 5.5 V 600 mA Fixed
8-Lead LFCSP
8-Lead SOIC
8-Lead LFCSP
8-Lead SOIC
8-Lead LFCSP
8-Lead SOIC
The ADM7155 regulator typical output noise is 0.9 ꢀV rms from
100 Hz to 100 kHz for fixed output voltage options and 1.5 nV/√Hz
for noise spectral density from 10 kHz to 1 MHz.
1 Adj means adjustable.
Rev. C
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2014–2016 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com