Simple Sequencers® in 6-Lead SC70
ADM1085/ADM1086/ADM1087/ADM1088
FEATURES
FUNCTIONAL BLOCK DIAGRAMS
Provide programmable time delays between enable
signals
V
CC
Can be cascaded with power modules for multiple
supply sequencing
Power supply monitoring from 0.6 V
Output stages
ADM1085/ADM1086
V
CAPACITOR
ADJUSTABLE
DELAY
IN
ENOUT
0.6V
High voltage (up to 22 V) open-drain output
(ADM1085/ADM1087)
Push-pull output (ADM1086/ADM1088)
GND
CEXT
ENIN
Capacitor-adjustable time delays
High voltage (up to 22 V) enable and VIN inputs
Low power consumption (15 μA)
V
CC
Specified over –40°C to +125°C temperature range
6-lead SC70 package
ADM1087/ADM1088
V
CAPACITOR
ADJUSTABLE
DELAY
IN
ENOUT
0.6V
APPLICATIONS
Desktop/notebook computers, servers
Low power portable equipment
Routers
GND
CEXT
ENIN
Figure 1.
Base stations
Line cards
Graphics cards
GENERAL DESCRIPTION
The ADM1085/ADM1086/ADM1087/ADM1088 are simple
sequencing circuits that provide a time delay between the
enabling of voltage regulators and/or dc-dc converters at power-
up in multiple supply systems. When the output voltage of the
first power module reaches a preset threshold, a time delay is
initiated before an enable signal allows subsequent regulators to
power up. Any number of these devices can be cascaded with
regulators to allow sequencing of multiple power supplies.
All four models have a dedicated enable input pin that allows
the output signal to the regulator to be controlled externally.
This is an active high input (ENIN) for the ADM1085 and
ADM1086, and an active low input (
) for the ADM1087
ENIN
and ADM1088.
The Simple Sequencers are specified over the extended
−40°C to +125°C temperature range. With low current
consumption of 15 μA (typical) and 6-lead SC70 packaging,
the parts are suitable for low-power portable applications.
Threshold levels can be set with a pair of external resistors in a
voltage divider configuration. With appropriate resistor values,
the threshold can be adjusted to monitor voltages as low as 0.6 V.
Table 1. Selection Table
Output Stage
Part No.
Enable Input ENOUT
ENOUT
The ADM1086 and ADM1088 have push-pull output stages,
with active high (ENOUT) and active low (
) logic
ADM1085
ENIN
Open-drain
ENOUT
outputs, respectively. The ADM1085 has an active-high
(ENOUT) logic output; the ADM1087 has an active-low
ADM1086
ADM1087
ADM1088
ENIN
Push-pull
(
) output. Both the ADM1085 and ADM1087 have
ENOUT
ENIN
ENIN
Open-drain
Push-pull
open-drain output stages that can be pulled up to voltage levels
as high as 22 V through an external resistor. This level-shifting
property ensures compatibility with enable input logic levels of
different regulators and converters.
Rev. A
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.461.3113
www.analog.com
©2006 Analog Devices, Inc. All rights reserved.