ADLSEC-1710 L-Peripheral
Edge-Connect Architecture
DESCRIPTION
The ADLSEC-1710 board is designed for convenient expansion of the
ADLE3800SEC Bay Trail Atom SBC via its edge-connect architecture.
The ADLE3800SEC plus ADLSEC-1710 L-peripheral combined provide a
complete 3.5” SBC solution with a host of expanded features including M.2
PCIe, SATA, DVI/DP/HDMI or USB3.0, UPS option, and more.
As part of a customer product portfolio, the ADLE3800SEC and
ADLSEC-1710 allows for a single processor, BIOS, firmware, and customer
software across products from small, compact ADLE3800SEC solutions to
more complex 3.5” sized solutions.
For further information, please contact our sales engineering team: sales@
adl-usa.com or sales@adl-europe.com
TECHNICAL SPECIFICATIONS
ADLSEC-1710
FEATURES
FUNCTIONS
3.5” SBC Footprint: 145mm x 102mm
(5.7” x 4.0”)
Dimensions
Operating Temperature
PCIe Expansion
-40C to 85C
Two PCIe X1 M.2 Key B Sockets with USB2.0:
2280 and 2260. No SATA.
50 mWh UPS Battery module; -40C to 65C
Estimated Capacitor Lifetime = 10yr@25C or
1500hr@65C.**
UPS Option
IPEX Connector
SATA
1x Displayport or HDMI or DVI or USB 3.0*
1x SATA II (3 Gb/s)
Shown: ADLSEC-1710 with ADLE3800SEC CPU and UPS Option.
ORDERING INFORMATION
GPIO
16 bit GPIO; PCA9535BS Controller; Non-Interrupt
Vin = 20V to 30V with Power Reset Button
3V Circular CR2032 Socket
ITEM CODE
PART #
DESCRIPTION
Power
3.5” SBC-Sized Expansion board
for ADLSEC SBCs.
ADLSEC-1710
ADLSEC-UPS50
ADL-LP1
Battery
50 mWh UPS Battery Option; -40C
to 65C.
1x Front CPU Status
1x Rear Power Status
1x Rear UPS Status
Front LED: Snap-on Panel Indicator.
LED
3x Rear Programmable LEDs
Note: LED light-pipe options for front panel indica-
tion available for both front and rear LEDs.
Rear LED: Long,flexible light-guide
for Front Panel Indicator.
ADL-LP2
*Not available on all mating SBCs.
Data subject to change without notice.
**Highly dependent on temperature and charge/discharge cycles.
ADL Corporate: 4411 Morena Blvd. Suite 101 | San Diego, CA 92117-4345
ADL Germany: Eiserfelder Straße 316 | D-57080 Siegen, Germany
T: 855.727.4200 (toll free)
F: 858.490.0599
T: +49 (0) 271.250.810.0
F: +49 (0) 271.250.810.20
sales@adl-usa.com
www.adl-usa.com
sales@adl-europe.com
www.adl-europe.com