Tactical Grade,
Six Degrees of Freedom Inertial Sensor
Data Sheet
ADIS16485
FEATURES
GENERAL DESCRIPTION
Triaxial, digital gyroscope, 450ꢀ°sec dynamic range
0.05ꢀ orthogonal alignment error
6ꢀ°hr in-run bias stability
0.3ꢀ°√hr angular random walk
0.01% nonlinearity
Triaxial, digital accelerometer, 5 g
Triaxial, delta angle, and delta velocity outputs
Fast start-up time, ~500 ms
The ADIS16485 iSensor® device is a complete inertial system that
includes a triaxial gyroscope and a triaxial accelerometer. Each
inertial sensor in the ADIS16485 combines industry-leading
iMEMS® technology with signal conditioning that optimizes
dynamic performance. The factory calibration characterizes
each sensor for sensitivity, bias, alignment, and linear acceleration
(gyroscope bias). As a result, each sensor has its own dynamic
compensation formulas that provide accurate sensor measurements.
Factory calibrated sensitivity, bias, and axial alignment
Calibration temperature range: −40ꢀC to +85ꢀC
SPI-compatible serial interface
The ADIS16485 provides a simple, cost-effective method for
integrating accurate, multiaxis inertial sensing into industrial
systems, especially when compared with the complexity and
investment associated with discrete designs. All necessary motion
testing and calibration are part of the production process at the
factory, greatly reducing system integration time. Tight orthogonal
alignment simplifies inertial frame alignment in navigation systems.
The SPI and register structure provide a simple interface for
data collection and configuration control.
Embedded temperature sensor
Programmable operation and control
Automatic and manual bias correction controls
4 FIR filter banks, 120 configurable taps
Digital I°O: data-ready alarm indicator, external clock
Alarms for condition monitoring
Power-down°sleep mode for power management
Optional external sample clock input: up to 2.4 kHz
Single command self test
The ADIS16485 uses the same footprint and connector system
as the ADIS16375, ADIS16488, and ADIS16488A, which greatly
simplifies the upgrade process. It comes in a module that is
approximately 47 mm × 44 mm × 14 mm and has a standard
connector interface.
Single-supply operation: 3.0 V to 3.6 V
2000 g shock survivability
Operating temperature range: −40ꢀC to +105ꢀC
APPLICATIONS
Platform stabilization and control
Navigation
Personnel tracking
Instruments
Robotics
FUNCTIONAL BLOCK DIAGRAM
DIO1 DIO2 DIO3 DIO4 RST
VDD
POWER
MANAGEMENT
GND
SELF TEST
I/O
ALARMS
TRIAXIAL
GYRO
OUTPUT
DATA
CS
REGISTERS
SCLK
DIN
TRIAXIAL
ACCEL
CALIBRATION
AND
FILTERS
SPI
CONTROLLER
USER
CONTROL
REGISTERS
TEMP
VDD
DOUT
CLOCK
ADIS16485
VDDRTC
Figure 1.
Rev. E
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights ofthird parties that may result fromits use. Specifications subject to change without notice. No
licenseis granted byimplication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2012−2015 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com