Tactical Grade, Six Degrees of Freedom
Inertial Sensor
Data Sheet
ADIS16495
FEATURES
GENERAL DESCRIPTION
Triaxial, digital gyroscope
The ADIS16495 is a complete inertial system that includes a
triaxis gyroscope and a triaxis accelerometer. Each inertial sensor
in the ADIS16495 combines industry leading iMEMS® technology
125°/sec, 450°/sec, 2000°/sec range options
0.05° axis to axis misalignment error
0.25° (maximum) axis to package misalignment error
0.8°/hr in-run bias stability (ADIS16495-1)
0.09°/√hr angular random walk (ADIS16495-1)
Triaxial, digital accelerometer, 8 g
with signal conditioning that optimizes dynamic performance.
The factory calibration characterizes each sensor for sensitivity,
bias, alignment, and linear acceleration (gyroscope bias). As a
result, each sensor has its own dynamic compensation formulas that
provide accurate sensor measurements.
3.2 μg in run bias stability
Triaxial, delta angle and delta velocity outputs
Factory calibrated sensitivity, bias, and axial alignment
Calibration temperature range: −40°C to +85°C
SPI compatible
Programmable operation and control
Automatic and manual bias correction controls
Configurable FIR filters
Digital I/O: data ready, external clock
Sample clock options: internal, external, or scaled
On demand self test of inertial sensors
Single-supply operation: 3.0 V to 3.6 V
1500 g mechanical shock survivability
Operating temperature range: −40°C to +105°C
The ADIS16495 provides a simple, cost effective method for
integrating accurate, multiaxis inertial sensing into industrial
systems, especially when compared with the complexity and
investment associated with discrete designs. All necessary motion
testing and calibration are part of the production process at
the factory, greatly reducing system integration time. Tight
orthogonal alignment simplifies inertial frame alignment in
navigation systems. The serial peripheral interface (SPI) and
register structure provide a simple interface for data collection
and configuration control.
The footprint and connector system of the ADIS16495 enable a
simple upgrade from the ADIS16375, ADIS16480, ADIS16485,
ADIS16488A, and ADIS16490. The ADIS16495 is available in an
aluminum package that is approximately 47 mm × 44 mm ×
14 mm and includes a standard connector interface.
APPLICATIONS
Precision instrumentation, stabilization
Guidance, navigation, control
Avionics, unmanned vehicles
Precision autonomous machines, robotics
FUNCTIONAL BLOCK DIAGRAM
DIO1 DIO2 DIO3 DIO4 RST
VDD
POWER
MANAGEMENT
GND
SELF TEST
I/O
OUTPUT
DATA
CS
TRIAXIAL
GYROSCOPE
REGISTERS
SCLK
DIN
CALIBRATION
AND
FILTERS
TRIAXIAL
ACCELEROMETER
SPI
CONTROLLER
USER
CONTROL
REGISTERS
TEMPERATURE
SENSOR
DOUT
CLOCK
ADIS16495
Figure 1.
Rev. C
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice.
No license is granted by implication or otherwise under any patent or patent rights of Analog
Devices. Trademarks and registeredtrademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
©2017-2020 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com