High Precision
Tri-Axis Inertial Sensor
ADIS16354
FUNCTIONAL BLOCK DIAGRAM
FEATURES
AUX_ADC
AUX_DAC
Tri-axis gyroscope with digital range scaling
7ꢀ5°s, 1ꢀ05°s, 3005°s settings
14-bit resolution
TEMPERATURE
SENSORS
ADIS16354
Tri-axis accelerometer
1.7 g measurement range, 14-bit resolution
3ꢀ0 Hz bandwidth
TRI-AXIS MEMS
ANGULAR RATE SENSOR
SIGNAL
CALIBRATION
CS
CONDITIONING
AND
AND
DIGITAL
PROCESSING
CONVERSION
Factory calibrated sensitivity, bias, and alignment
Calibration temperature range: −205C to +705C
Operating temperature range: −405C to +8ꢀ5C
Digitally controlled bias calibration
Digitally controlled sample rate
Digitally controlled filtering
SCLK
DIN
SPI
PORT
DIGITAL
CONTROL
DOUT
VCC
GND
SELF-TEST
TRI-AXIS MEMS
ACCELERATION
SENSOR
Programmable condition monitoring
Auxiliary digital input°output
Digitally activated self-test
POWER
AUX
I/O
ALARMS
Programmable power management
Embedded temperature sensor
SPI-compatible serial interface
Auxiliary 12-bit ADC input and DAC output
Single-supply operation: 4.7ꢀ V to ꢀ.2ꢀ V
2000 g shock survivability
MANAGEMENT
RST
DIO1 DIO2
Figure 1.
APPLICATIONS
Guidance and control
Platform control and stabilization
Motion control and analysis
Inertial measurement units
General navigation
Image stabilization
Robotics
GENERAL DESCRIPTION
The ADIS16354 iSensor™ is a complete triple axis gyroscope
and triple axis accelerometer inertial sensing system. This
sensor combines the Analog Devices, Inc., iMEMS® and mixed
signal processing technology to produce a highly integrated
solution, providing calibrated, digital inertial sensing. An SPI
interface and simple output register structure allow for easy
access to data and configuration controls.
compensates for all major influences on the MEMS sensors,
thus maintaining highly accurate sensor outputs without
further testing, circuitry, or user intervention.
The following programmable features simplify system integration:
•
•
•
•
•
•
In-system autobias calibration
Digital filtering and sample rate
Self-test
Power management
Condition monitoring
Auxiliary digital input/output
The SPI port provides access to the following embedded sensors:
X-, Y-, and Z-axis angular rates; X-, Y-, and Z-axis linear accelera-
tion; internal temperature; power supply; and auxiliary analog
input. The inertial sensors are precision-aligned across axes,
and are calibrated for offset and sensitivity over a temperature
range of −20°C to +70°C. An embedded controller dynamically
This compact module is approximately 23 mm × 23 mm ×
23 mm and provides a convenient flex-based connector system.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.461.3113
www.analog.com
©2008 Analog Devices, Inc. All rights reserved.