Wideband 2.5 GHz, 37 dB Isolation at 1 GHz,
CMOS, 1.65 V to 2.75 V, 4:1 Mux/SP4T
ADG904-EP
Enhanced Product
FEATURES
FUNCTIONAL BLOCK DIAGRAM
ADG904-EP
Wideband switch: –3 dB frequency at 2.5 GHz
Absorptive 4:1 mux/single-pole, four-throw (SP4T)
High off isolation (37 dB at 1 GHz)
Low insertion loss (1.1 dB dc to 1 GHz)
RF1
RF2
RF3
RF4
50Ω
50Ω
50Ω
Single 1.65 V to 2.75 V power supply (VDD
CMOS/LVTTL control logic
)
RFC
20-lead, 4 mm × 4 mm LFCSP package
Low power consumption (2.5 µA maximum)
ENHANCED PRODUCT FEATURES
Supports defense and aerospace applications (AQEC standard)
Military temperature range: −55°C to +125°C
Controlled manufacturing baseline
1 assembly/test site
50Ω
1 fabrication site
1 OF 4 DECODER
Enhanced product change notification
Qualification data available on request
A0 A1 EN
Figure 1.
APPLICATIONS
Wireless communications
General-purpose radio frequency (RF) switching
Dual-band applications
High speed filter selection
Digital transceiver front-end switches
IF switching
Tuner modules
Antenna diversity switching
GENERAL DESCRIPTION
The ADG904-EP is a wideband analog 4:1 multiplexer that uses
a CMOS process to provide high isolation and low insertion
loss to 1 GHz. The ADG904-EP is an absorptive/matched mux
with 50 Ω terminated shunt legs. This device is designed such
that the isolation is high over the dc to 1 GHz frequency range.
The device has on-board CMOS control logic, which eliminates
the need for external control circuitry. The control inputs are both
CMOS and LVTTL compatible. The low power consumption of
this device makes it ideally suited for wireless applications and
general-purpose high frequency switching.
The ADG904-EP switches one of four inputs to a common
output, RFC, as determined by the 3-bit binary address lines
Additional application and technical information can be found
in the ADG904 data sheet.
A0, A1, and
. A Logic 1 on the
pin disables the device.
EN
EN
PRODUCT HIGHLIGHTS
1. 37 dB off isolation at 1 GHz.
2. 1.1 dB insertion loss at 1 GHz.
3. 20-lead LFCSP package.
Rev. C
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rightsof third parties that may result fromits use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks andregisteredtrademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2016–2017 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com