CMOS, Low-Voltage, 3-Wire
Serially-Controlled, Matrix Switches
a
ADG738/ADG739
FEATURES
FUNCTIONAL BLOCK DIAGRAMS
3-Wire Serial Interface
2.7 V to 5.5 V Single Supply
2.5 ⍀ On Resistance
ADG738
ADG739
0.75 ⍀ On-Resistance Flatness
100 pA Leakage Currents
Single 8-to-1 Multiplexer ADG738
Dual 4-to-1 Multiplexer ADG739
Power-On Reset
S1
S1A
S4A
DA
D
TTL/CMOS-Compatible
S1B
S4B
DB
APPLICATIONS
S8
Data Acquisition Systems
Communication Systems
Relay Replacement
INPUT SHIFT
REGISTER
INPUT SHIFT
REGISTER
DOUT
DOUT
Audio and Video Switching
SCLK
SYNC
DIN
SCLK DIN SYNC RESET
GENERAL DESCRIPTION
PRODUCT HIGHLIGHTS
The ADG738 and ADG739 are CMOS analog matrix switches
with a serially-controlled 3-wire interface. The ADG738 is an
8-channel matrix switch, while the ADG739 is a dual 4-channel
matrix switch. On resistance is closely matched between switches
and very flat over the full signal range.
1. 3-Wire Serial Interface.
2. Single Supply Operation. The ADG738 and ADG739 are
fully specified and guaranteed with 3 V and 5 V supply rails.
3. Low On Resistance, 2.5 Ω typical.
4. Any configuration of switches may be on or off at any one time.
5. Guaranteed Break-Before-Make Switching Action.
6. Small 16-lead TSSOP Package.
The ADG738 and ADG739 utilize a 3-wire serial interface that
is compatible with SPI™, QSPI™, MICROWIRE™, and some
DSP interface standards. The output of the shift register DOUT
enables a number of these parts to be daisy-chained. On power-up,
the internal shift register contains all zeros and all switches
are in the OFF state.
Each switch conducts equally well in both directions when on,
making these parts suitable for both multiplexing and demulti-
plexing applications. As each switch is turned on or off by a
separate bit, these parts can also be configured as a type of switch
array, where any, all, or none of the eight switches may be closed
at any time. The input signal range extends to the supply rails.
All channels exhibit break-before-make switching action,
preventing momentary shorting when switching channels.
The ADG738 and ADG739 are available in 16-lead TSSOP
packages.
SPI and QSPI are trademarks of Motorola, Inc.
MICROWIRE is a trademark of National Semiconductor Corporation.
REV. 0
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties
which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700
Fax: 781/326-8703
World Wide Web Site: http://www.analog.com
© Analog Devices, Inc., 2000