CMOS, Low Voltage, 3-Wire
Serially-Controlled, Matrix Switches
Data Sheet
ADG738/ADG739
FEATURES
FUNCTIONAL BLOCK DIAGRAMS
3-wire serial interface
2.7 V to 5.5 V single supply
2.5 Ω on resistance
ADG738
S1
0.75 Ω on-resistance flatness
100 pA leakage currents
Single 8-to-1 multiplexer ADG738
Dual 4-to-1 multiplexer ADG739
Power-on reset
D
S8
TTL/CMOS-compatible
Qualified for automotive applications
INPUT SHIFT
DOUT
REGISTER
APPLICATIONS
Data acquisition systems
Communication systems
Relay replacement
SCLK DIN SYNC RESET
Figure 1.
Audio and video switching
ADG739
S1A
DA
S4A
S1B
DB
S4B
INPUT SHIFT
DOUT
REGISTER
GENERAL DESCRIPTION
The ADG738 and ADG739 are CMOS analog matrix switches
with a serially-controlled 3-wire interface. The ADG738 is an
8-channel matrix switch, while the ADG739 is a dual 4-channel
matrix switch. On resistance is closely matched between switches
and very flat over the full signal range.
SCLK DIN SYNC
Figure 2.
The ADG738 and ADG739 utilize a 3-wire serial interface
that is compatible with SPI™, QSPI™, MICROWIRE®, and some
DSP interface standards. The output of the input shift register,
DOUT, enables a number of these parts to be daisy-chained.
On power-up, the internal input shift register contains all zeros
and all switches are in the off state.
All channels exhibit break-before-make switching action,
preventing momentary shorting when switching channels.
The ADG738 and ADG739 are available in 16-lead TSSOP
packages.
PRODUCT HIGHLIGHTS
1. 3-Wire Serial Interface.
Each switch conducts equally well in both directions when on,
making these parts suitable for both multiplexing and demulti-
plexing applications. As each switch is turned on or off by a
separate bit, these parts can also be configured as a type of
switch array, where any, all, or none of the eight switches may
be closed at any time. The input signal range extends to the
supply rails.
2. Single Supply Operation. The ADG738/ADG739 are fully
specified and guaranteed with 3 V and 5 V supply rails.
3. Low On Resistance, 2.5 Ω typical.
4. Any configuration of switches may be on or off at any
one time.
5. Guaranteed Break-Before-Make Switching Action.
6. Small 16-lead TSSOP Package.
Rev. A
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rightsof third parties that may result fromits use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks andregisteredtrademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2000–2012 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com