2Ω
Max On Resistance,
± ±1 ꢀV±2 ꢀV± 1 ꢀ ꢁꢂ±
iCMOS™ Multiplexer
Preliminary Technical Data
ADG±ꢁ0ꢁ
FEATURES
FUNCTIONAL BLOCK DIAGRAM
2Ω Max On Resistance
ADG1404
S1
0.5Ω Max On Resistance Flatness
200mA Continuous current
33 V supply range
Fully specified at +12 V, 1ꢀ V, ꢀ V
No VL supply required
S2
D
S3
S4
3 V logic-compatible inputs
Rail-to-rail operation
1 OF 4
DECODER
14-lead TSSOP and 16-lead LFCSP
A0
A1
EN
APPLICATIONS
Figure 1.
Automatic test equipment
Data aquisition systems
Battery-powered systems
Sample-and-hold systems
Audio signal routing
Communication systems
Relay Replacement
GENERAL DESCRIPTION
The ADG1404 is a complementary metal-oxide semiconductor
(CMOS) analog multiplexer, comprising four single channels
designed on an iCMOS process. iCMOS (industrial CMOS) is a
modular manufacturing process that combines high voltage
CMOS and bipolar technologies. It enables the development of
a wide range of high performance analog ICs capable of 33 V
operation in a footprint that no previous generation of high
voltage parts has been able to achieve. Unlike analog ICs using
conventional CMOS processes, iCMOS components can
tolerate high supply voltages while providing increased
performance, dramatically lower power consumption, and
reduced package size.
The ADG1404 switches one of four inputs to a common output,
D, as determined by the 3-bit binary address lines, A0, A1, and
EN. Logic 0 on the EN pin disables the device. Each switch
conducts equally well in both directions when on and has an
input signal range that extends to the supplies. In the off condi-
tion, signal levels up to the supplies are blocked. All switches
exhibit break-before-make switching action. Inherent in the
design is low charge injection for minimum transients when
switching the digital inputs.
PRODUCT HIGHLIGHTS
1. 2Ω Max On Resistance over temperature.
2. Minimum distortion
The on resistance profile is very flat over the full analog input
range ensuring excellent linearity and low distortion when
switching audio signals.
3. 3 V logic-compatible digital inputs:
VIH = 2.0 V, VIL = 0.8 V
4. No VL logic power supply required.
5. Ultralow power dissipation: <0.03 µW.
6. 14-lead TSSOP and 16-lead 4 mm × 4 mm LFCSP package.
iCMOS construction ensures ultralow power dissipation,
making the parts ideally suited for portable and battery-
powered instruments.
Rev.PrB
Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice. No license is granted by implication
or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.461.3113
www.analog.com
© 2007 Analog Devices, Inc. All rights reserved.