Single/Dual/Quad Comparators
With Known Power-Up State
Data Sheet
ADCMP391/ADCMP392/ADCMP393
FEATURES
FUNCTIONAL BLOCK DIAGRAMS
VCC
Single-supply voltage operation: 2.3 V to 5.5 V
Rail-to-rail common-mode input voltage range
Low input offset voltage across VCMR: 1 mV typical
Guarantees comparator output logic low from VCC = 0.9 V to
undervoltage lockout (UVLO)
ADCMP391
IN+
OUT
IN–
GND
Operating temperature range: −40°C to +125°C
Package types:
8-lead, narrow body SOIC (ADCMP391/ADCMP392)
14-lead, narrow body SOIC (ADCMP393)
14-lead TSSOP (ADCMP393)
Figure 1.
VCC
ADCMP392
INA+
OUTA
INA–
APPLICATIONS
INB+
OUTB
INB–
Battery management/monitoring
Power supply detection
GND
Window comparators
Figure 2.
Threshold detectors/discriminators
Microprocessor systems
VCC
GENERAL DESCRIPTION
ADCMP393
INA+
OUTA
INA–
The ADCMP391/ADCMP392/ADCMP393 are
single/dual/quad rail-to-rail input, low power comparators ideal
for use in general-purpose applications. These comparators
operate from a single supply voltage of 2.3 V to 5.5 V and draw
a minimal amount of current. The single ADCMP391
consumes only 18.6 µA of supply current. The dual ADCMP392
and the quad ADCMP393 consumes 22.1 µA and 26.8 µA of
supply current, respectively. The low voltage and low current
operation of these devices makes it ideal for battery-powered
systems.
INB+
OUTB
INB–
INC+
OUTC
INC–
IND+
OUTD
IND–
GND
Figure 3.
The comparators features a common-mode input voltage range
of 200 mV beyond rails, an offset voltage of 1 mV typical across
the full common-mode range, and a UVLO monitor. In addition,
the design of the comparators allows a defined output state
upon power-up, a logic low output while the supply voltage is
less than the UVLO threshold.
The ADCMP391 and ADCMP392 are available in 8-lead,
narrow body SOIC package while the ADCMP393 is available
in a 14-lead, narrow body SOIC package and a 14-lead TSSOP
package. The comparators are specified to operate over the
−40°C to +125°C extended temperature range.
Rev. D
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rightsof third parties that may result fromits use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks andregisteredtrademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2014–2016 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com